Denon AVR-1723

47
Error
Code
Details of Error code Display Coping strategies
5C
DSP, PLD etc. failed to receive
rmware for rewriting sent from
DM860A (when timed out).
U p d a t i n g f a i l 5 C
Turn off and on the power.
Updating starts automatically.
5D
DSP, PLD etc. failed to receive
rmware for rewriting sent from
DM860A (when an error occurred).
U p d a t i n g f a i l 5 D
Turn off and on the power.
Updating starts automatically.
5E
Data in rmware such as DSP and
PLD for rewriting sent from DM860A
was invalid (when a Check Sum error
occurred).
U p d a t i n g f a i l 5 E
Turn off and on the power.
Updating starts automatically.
5F
Invalid data in rmware such as
DSP and PLD for rewriting sent from
DM860A was invalid (invalid data was
received).
U p d a t i n g f a i l 5 F
Turn off and on the power.
Updating starts automatically.
60
NACK was received when "P"
command sent to DSP, PLD etc.
U p d a t i n g f a i l 6 0
Turn off and on the power.
Updating starts automatically.
61
NACK was received when "I"
command sent to DSP, PLD etc.
U p d a t e C h e c k N G 6 1
Turn off and on the power.
Updating starts automatically.
80
Acquisition of serial ash data failed
before serial ash was deleted.
U p d a t i n g f a i l 8 0
Turn off and on the power.
Updating starts automatically.
81
Deleting data failed before serial ash
was rewritten.
U p d a t i n g f a i l 8 1
Turn off and on the power.
Updating starts automatically.
82
Receiving rmware for rewriting serial
ash sent by DM860A failed (when
timed out).
U p d a t i n g f a i l 8 2
Turn off and on the power.
Updating starts automatically.
83
Receiving rmware for rewriting serial
ash sent by DM860A failed (when an
error).
U p d a t i n g f a i l 8 3
Turn off and on the power.
Updating starts automatically.
84
Receiving rmware for rewriting serial
ash sent by DM860A failed (when a
Check Sum error).
U p d a t i n g f a i l 8 4
Turn off and on the power.
Updating starts automatically.
85
Receiving rmware for rewriting serial
ash sent by DM860A failed (when
invalid data was received).
U p d a t i n g f a i l 8 5
Turn off and on the power.
Updating starts automatically.
86
The data verication was invalid after
serial ash was rewritten.
U p d a t i n g f a i l 8 6
Turn off and on the power.
Updating starts automatically.
A0
Acquisition of (Application Mode) IP
address failed before DM860A was
rewritten (AutoIP).
C o n n e c t i o n F a i l A 0
Check the network connection.
Carry out the update in an environment
that has little network load.
A1
Acquisition of (Application Mode) IP
address failed before DM860A was
rewritten (when timed out).
C o n n e c t i o n F a i l A 1
Check the network connection.
Carry out the update in an environment
that has little network load.
A2
Invalid login via DPMS access
was notied when DM860A related
rmware was rewritten (Application
Mode).
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an environment
that has little network load.