EasyManuals Logo

Denon AVR-1905 User Manual

Denon AVR-1905
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)
1
3
Start playing the source to be output.
For operating instructions, refer to the manuals of the
respective components.
12, 4 2
VCR V.AUX CDR / TAPE
CD TUNER AUX DVD / VDP TV / DBS
2
ZONE2
ZONE2 SOURCE
Display
NOTES:
The signals of the source selected in the ZONE2 mode are also
output from the VCR and CDR/TAPE recording output terminals.
Digital signals are not output to the ZONE2 output jacks.
Press the ZONE2/REC SELECT button.
The display switches as follows each
time the button is pressed.
ZONE 2 /
REC SELECT
(Main unit)
2
With “ZONE2 SOURCE” displayed, turn
the FUNCTION knob and select the source
you wish to record.
FUNCTION
(Main unit)
4
To cancel, turn the function knob and
select “SOURCE”.
FUNCTION
(Main unit)
Multi-source playback
[2] Remote control unit operations during multi-source playback (selecting the source)
1
Set the slide switch to “AUDIO” and “ZONE2”.
5
1
2
3
4
1
(Remote control unit)
2
Press the ZONE2 “ON” button.
To cancel the ZONE2 mode.
Press the ZONE2 “OFF” button.
(Remote control unit)
3
Press the input source button.
The ZONE2 source switches directly.
4
The output level of the ZONE 2 SPEAKER
OUT terminals can be controlled using the
VOLUME + and – buttons on the remote
control unit.
(Remote control unit)
DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
5
When the ZONE2 SOURCE function is set
to TUNER, the preset channel can be
selected using the CHANNEL + and –
buttons on the remote control unit.
(This is only possible when the main unit
in the ZONE2 mode.)
(Remote control unit)
The main zone output can be
turned on and off with the MAIN
ON/OFF button.
2
SURROUND
BACK
ZONE 2
OUTPUT
(Light)
44
ENGLISH

Other manuals for Denon AVR-1905

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1905 and is the answer not in the manual?

Denon AVR-1905 Specifications

General IconGeneral
Speakers connectivity type-
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)110 W
Power output per channel (20-20KHz@8 Ohm)80 W
Product colorBlack
Audio decodersDTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Digital Signal Processing (DSP)Yes
HDMI in0
Composite video in4
Digital audio coaxial in1
Component video (YPbPr/YCbCr) in3
S-Video outputs quantity2
Ethernet LANNo
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
AC input voltage120 V
AC input frequency60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth171 mm
Width434 mm
Height416 mm
Weight11900 g

Related product manuals