EasyManuals Logo

Denon AVR-1908 Specifications

Denon AVR-1908
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AVR-1908
AV Surround Receiver
New model information
A/V Surround Receiver featuring HD Video connectivity,
that enhances your level of entertainment enjoyment.
The Latest HD Video Support
HDMI1.3a inputs/output
HDMI audio support, Dolby Digital, dts and multi channel PCM
Deep Color up to 36-bit and xvYCC broader color space support
Discrete devices for ultimate HD video performance in each block
10-bit video encoder and decoder
1080p video pass through
MultEQ Auto setup and Room EQ
New tower type microphone for more
accurate measuring
Up to six measurement points
High level resolution filters for satellite
speakers and also subwoofer
Denon Design Solutions for Maximizing Content Quality
Indentical quality and power for all 7 channels, 90W x 7ch
Discrete devices for ultimate performance in each block
New 32-bit floating point DSP
Minimum signal path design
Direct Mechanical Ground for stable drive
Dual power transformer
Denon customised block capacitor
Separate unit design
Compressed Audio Restorer
Denon's new audio technology for MP3/WMA/AAC compressed audio
formats to reproduce higher frequency range and deeper bass sound.
Digital Media Connectivity
Network Audio/Photo Ready (optional ASD-3N/3W)
iPod Audio/Photo and Video playback
(optional ASD-1R/3N/3W)
XM Ready
Ease-of-Use
Auto set-up and Room EQ, featuring MultEQ from Audyssey
3 Quick Select Buttons
New back panel layout
Multi-Zone Capability
Two Zone multi-source capability
Zone 2 audio output
Power amplifier assign for zone 2
Includes dedicated zone remote control unit
Remote in/out
Other Features
Auto Surround Back Channels ON function, for auto-detection of
supporting sources
Auto Surround mode
Audio Delay function (max. 6 frames or 200 msec)
Night Mode for neighbor friendly listening
Muting level settings (Full/-40dB/-20dB)
Audio Level Memory, capable of correcting different signal levels for each
input device
Volume Level Limiter, for setting maximum volume levels
Power-ON Volume Level Memory
Variable subwoofer crossover switching
Bullet points
*Shown ASD-3W
*Seup mic included

Other manuals for Denon AVR-1908

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1908 and is the answer not in the manual?

Denon AVR-1908 Specifications

General IconGeneral
Channels7.1
Power Output90W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI Inputs2
HDMI Outputs1
Dolby DigitalYes
DTSYes
TypeAV Receiver
Component Video Inputs3
Component Video Outputs1
Digital Audio Inputs2 Optical, 2 Coaxial
TunerAM/FM
Frequency Response10Hz-100kHz (+1, -3dB)
Input Sensitivity/Impedance200mV/47k ohms
Signal-to-Noise Ratio98 dB
Power Consumption460W
Surround Sound FormatsDolby Digital, DTS
Total Harmonic Distortion0.08%
Tuner Frequency RangeAM: 522-1611 kHz, FM: 87.5-108.0 MHz
Standby Power ConsumptionLess than 1W

Related product manuals