To Next Page
M
Megan LeeSep 7, 2025
How to enable DTS sound output on Denon Receiver?
- TThomas HuntSep 7, 2025
If your Denon Receiver is not outputting DTS sound, set “Decode Mode” on the menu to “Auto” or “DTS”.
How to enable DTS sound output on Denon Receiver?
If your Denon Receiver is not outputting DTS sound, set “Decode Mode” on the menu to “Auto” or “DTS”.
What to do if no video is output with HDMI connection on Denon AVR-1913?
If there is no video output with an HDMI connection on your Denon Receiver, please check the following: * Verify the HDMI connector connections. * Ensure the input source matches the connected HDMI connector. * Confirm that the TV is compatible with copyright protection (HDCP). If the device connected is not HDCP-compatible, the video output may not function correctly.
What to do if Denon Receiver cannot be operated with the remote control unit?
If the set cannot be operated with the remote control unit of your Denon Receiver: * Replace the batteries with new ones. * Ensure you are operating the remote within 23 ft/7 m of the unit and within a 30° angle. * Remove any obstacles between the unit and the remote. * Verify the batteries are inserted correctly, matching the polarity marks. * Strong light (direct sunlight, inverter-type fluorescent bulb light, etc.) may be interfering with the set’s remote control sensor. Move the set to a location where the sensor is not exposed to strong light. * Ensure the setting of the zone to operate matches. Press MAIN or ZONE2 to select the correct zone.
Why there is no sound using AirPlay on Denon Receiver?
If there is no sound when using AirPlay on your Denon Receiver: * Check the volume in iTunes or on the iPhone/iPod touch/iPad and adjust it to an audible level. * Ensure this unit is selected in the screen displayed when iTunes or the iPhone/iPod touch/iPad is started. Click the AirPlay icon and select this unit. * Verify that AirPlay playback has started by clicking the play button in iTunes or pressing the play button on the iPhone/iPod touch/iPod.
How to fix Denon Receiver if power does not turn on?
If your Denon Receiver power does not turn on, verify these: * Ensure the power plug is properly inserted into the power outlet. * If the protection circuit is active, disconnect the power plug, wait 5 to 10 seconds, and then reinsert it.
Why file names are not displayed properly on Denon AVR-1913?
If the file names are not displayed properly (“...”, etc.) on your Denon Receiver: * The file names may contain characters that cannot be displayed, which is normal. These characters are replaced with a period (“.”). * The USB cable connecting the USB memory device and the unit may use incompatible tags. Use USB memory devices with tags supported by the unit.
How to troubleshoot no sound from front height speaker on Denon AVR-1913 Receiver?
If there is no sound from the front height speaker on your Denon Receiver: * Check if “Amp Assign” is set appropriately to output audio from the front height speakers. * Set “Speaker Config.” – “Front Height” in the menu to something other than “None.”
Why no sound is produced from surround back speaker on Denon Receiver?
If there is no sound from the surround back speaker on your Denon Receiver: * Check if “Amp Assign” is set correctly to output audio from the surround back speakers. * Set “Speaker Config.” – “Surr. Back” in the menu to something other than “None”. * Ensure the sound mode is set to something other than “STEREO” and “VIRTUAL.”
Why the volume does not increase on Denon AVR-1913 Receiver?
If the volume does not increase on your Denon Receiver: * The maximum volume may be set too low. Adjust the maximum volume using “Limit” in the menu. * External devices connected to the unit's output connectors may not be powered on. Check the power status of these connected devices.
What to do if audio is not output on Denon AVR-1913 Receiver?
If there is no audio output from your Denon Receiver, consider the following: * Check the connections for all devices. * Verify the speaker connections and configurations. * Ensure the audio device is powered on. * Adjust the master volume. * Cancel mute mode. * Check the connection with the playback device and select the correct input source. * Match the input mode and the terminal assigned to the digital input terminal. * Disconnect the headphones, as no sound is output from the speakers when headphones are connected.
General| Receiver type | - |
|---|---|
| Audio output channels | 7.1 channels |
| Power output per channel (1KHz@6 Ohm) | 125 W |
| Power output per channel (20-20KHz@8 Ohm) | 90 W |
| HDMI in | 6 |
| Audio (L/R) in | 5 |
| Composite video in | 3 |
| Component video (YPbPr/YCbCr) in | 1 |
| Audio formats supported | AAC, FLAC, MP3, WMA |
| Ethernet LAN | Yes |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | FM |
| Internet radio services supported | Pandora, SIRIUS Internet Radio, Spotify, vTuner |
| Card reader integrated | No |
| Supported video modes | 1080p |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| Product color | Black |
| Audio decoders | Dolby Digital Plus, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Neo:6, DTS-ES (Discrete 6.1), DTS-HD, DTS-HD Master Audio |
| Volume control | Rotary |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 434.3 mm |
| Height | 328.9 mm |
| Weight | 9099 g |
