Denon AVR-2112CI

110
Specifying the zone used with the
main remote control unit
When the ZONE SELECT button is pressed, only the set zone can be
operated with the remote control unit.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes twice.
2
Press ZONE SELECT.
The zone mode indicator flashes twice.
3
Press 1 – 3 to set.
The zone mode indicator flashes twice.
[Settable items]
1 When only using “MAIN ZONE”
2 When using “MAIN ZONE” /
“ZONE2”
3 When using “MAIN ZONE” /
“ZONE2” / “ZONE3” (Default)
Resetting the remote control unit
Settings for the remote control unit are returned to the default values.
1
Press and hold ZONE/DEVICE Z
for at least 3 seconds.
The zone mode indicator flashes twice.
2
Press 9, 8 and 1, in that order.
J indicator flashes four times.
All the settings are restored to their
defaults.
Basic version Advanced version InformationAdvanced version