Denon AVR-2112CI

119
Surround
Surround mode (vpage46)
Surr.Parameter (vpage79)
Tone
z15
(
vpage81)
Audyssey Settings
z17
(vpage81)
RESTORER
z20
(
vpage83)
Height Gain
(
vpage80)
PLgz Height
z13
(
vpage80)
AFDM
z14
(
vpage80)
S.Back
(
vpage80)
Subwoofer
(
vpage80)
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama
(
vpage79)
Dimension
(
vpage79)
C.Width
(
vpage79)
C.Image
(
vpage79)
MultEQ
®
XT
(
vpage81)
Dynamic EQ
®
z18
(
vpage82)
Dynamic
Volume
®
z19
(
vpage82)
DIRECT/PURE DIRECT (2 channel)
z1
S
z4
DIRECT/PURE DIRECT (Multi-channel)
z1
STEREO
SSSSS
MULTI CH IN
S
z12
S SSSS
DOLBY PRO LOGIC gz SS SSSSS
DOLBY PRO LOGIC gx S SSS SSSSS
DOLBY PRO LOGIC g S SSS SSSSS
DTS NEO:6
S SSSSSS
DOLBY DIGITAL
S
z12
SSS SSSS
DOLBY DIGITAL Plus
S
z12
SSS SSSS
DOLBY TrueHD
S
z12
SSS SSSS
DTS SURROUND
S
z12
SSS SSSS
DTS 96/24
S
z12
SSS SSSS
DTS-HD
S
z12
SSS SSSS
DTS Express
S
z12
SS SSSS
MULTI CH STEREO
SSSSS
ROCK ARENA
S
z16
SSSS
JAZZ CLUB
SSSSS
MONO MOVIE
SSSSS
VIDEO GAME
SSSSS
MATRIX
SSSSS
VIRTUAL
SSSSS
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z4 Only when “Subwoofer Mode” is set to “LFE+Main” (
vpage87), sound is output from the subwoofer.
z12 This item can be selected when “Surr.Parameter” – “PLgz Height” (
vpage80) is set to “ON”.
z13 If “Speaker Config.” – “F.Height” (
vpage87) is set to “None”, this item cannot be selected.
z14 This item can be selected when a Dolby Digital or DTS signal is played.
z15 This item cannot be set when “Dynamic EQ
®
” (
vpage82) is set to “ON”.
z16 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z17 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z18 This item cannot be set when “MultEQ
®
XT” (
vpage81) is set to “OFF” or “Manual”.
z19 This item cannot be set when “Dynamic EQ
®
” (
vpage82) is set to “OFF”.
z20 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
Basic version Advanced version InformationInformation