61
Convenient functions
NOTE
tWhen “HDMI Control” is set to “ON”, it consumes more
standby power.
tThe HDMI control function controls operations of a TV that is
compatible with the HDMI control function. Make sure that the TV
and HDMI are connected when you perform HDMI control.
tSome functions may not operate depending on the connected TV
or player. Check the owner’s manual of each device for details
beforehand.
tWhen “P.Off Control” on the menu is set to “OFF” (
vpage89),
this unit is not set to standby even if the connected device is in the
standby mode.
tWhen connection changes are implemented, such as adding
connections to HDMI devices, linked operations may be initialized.
In this case, you will need to reconfigure the settings.
tWhen “HDMI Control” is set to “ON”, it is not possible to assign an
HDMI connector to “TV” at “Input Assign” (
vpage101).
tShould any of the operations below be performed, the interlocking
function may be reset, in which case, repeat steps 2 and 3.
t“Input Assign” – “HDMI” (
vpage101) setting has changed.
tThere is a change to the connection between the devices and the
HDMI, or an increase in devices.
Sleep timer function
The power automatically goes into standby once the set time has
elapsed.
This is convenient for playing sources while going to sleep.
Press SLEEP and display the time you
want to set.
The “SLEEP” indicator on the display lights.
tThe time switches as shown below each
time
SLEEP is pressed.
OFF 10 min 20 30 40 50
6080 7090100
110
120
tIf SLEEP on the main unit is pressed, the same function as with the
remote control unit can be obtained.
To confirm the countdown time before putting the
unit to sleep
Press SLEEP.
“Sleep : zmin” appears on the display.
z Countdown time
To cancel the sleep timer
Press SLEEP to set “OFF”.
The “SLEEP” indicator on the display turns off.
tThe sleep timer setting is canceled if this unit’s power is set to
standby.
tThe sleep timer function can be set separately for the different zones
(
vpage72 “Sleep timer function”).
Basic version Advanced version InformationAdvanced version