72
Sound Mode
Surround Parameter
Subwoofer
Tone
z12
Audyssey
z13
Restorer
z15
Effect Level Room Size
Height Gain
z11
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama Dimension Center Width Center Image MultEQ
®
Dynamic EQ
®
z14
Dynamic
Volume
®
z14
DIRECT/PURE DIRECT (2channel)
z1
S
z5
DIRECT/PURE DIRECT (Multi-channel)
z1
S
STEREO
S S S S S
MULTI CH IN
S S S S S S
DOLBY PRO LOGIC gz S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S
DOLBY PRO LOGIC
S S S S S S S S S
DTS NEO:6
S S S S S S S
DOLBY DIGITAL
S S S S S S
DOLBY DIGITAL Plus
S S S S S S
DOLBY TrueHD
S S S S S S
DTS SURROUND
S S S S S S
DTS 96/24
S S S S S S
DTS-HD
S S S S S S
DTS Express
S S S S S S
MULTI CH STEREO
S S S S S S
ROCK ARENA
S S S S
z16
S S S S
JAZZ CLUB
S S S S S S S S
MONO MOVIE
S S S S S S S S
VIDEO GAME
S S S S S S S S
MATRIX
S S S S S S
VIRTUAL
S S S S S S
z1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z5 Only when “Subwoofer Mode” is set to “LFE+Main”, sound is output from the subwoofer.
z11 This setting is available when the set sound mode name contains “+PLgz”. For information on how to check the sound mode.
z12 This item cannot be set when “Dynamic EQ
®
” is set to “On”.
z13 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.
z14 This item cannot be set when “MultEQ
®
” is set to “Off” or “Graphic EQ”.
z15 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z16 In this sound mode, bass is +6 dB, and treble is +4 dB (Default).
To Next Page
Loading...
Need help?
General
