DIRECTIONOF
BROADCASTING
STATION
'_'_ _,_ FM ANTENNA
76 [_/ohms
COAXIAL
CABLE
FM INDOO_
ANTENNA
(Supplied)
AM LOOP
ANTENNA
(Supplied)
.................o®®®
,///
GROUND
AM OUTDOOR
ANTENNA
• An F-type FM antenna cable plug can be connected directly.
Connection of AM antennas
1 Pushthe lever. 2. P_sertthe conductor. 3. Return the lever.
_> =>
AM loop antenna assembly
Connect to the AM
antenna te_mblals
and take out the
(_ connection line. Bend in the reverse
_/ direction. -_
a. With the antenna "
on top any stable _1_
surface
Mount
b. With the antenna
attached to a wall
Installation hole
_, Mount on wall, etc.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC which provides
guidelines for proper grounding and, in particulaL specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
• These jacks are fer inputting multi-channel audie signals frem an eutboard deceder, or a cemponent with a different type ef multFchannel
decoder, such as a DVD Audie player, a multi-channel SACD player, er other future multi-channel sound fermat deceder.
• When making connections, also refer to the eperating instructiens of the ether components.
o o
LP
Decoder with 8- or 6-channel l I
analog output _ o o O
._ Fer instructiens on playback using the external input (EXT. IN)
jacks. (See page 61 )
10
To Next Page
Loading...
Need help?
General
