Denon AVR-2805 - Page 38

• Set the method of playback of the analog input signal connected to the Ext.ln Subwoofer.
1
(Remote control unit)
Select "Ext.ln Subwoefer Level" at the Input Setup Menu.
z_c
"3. Input Setup
I, Digital in Assign
_2. Ext. In Subw00fer Level
3. Component In Assign
4, Video input Mode
5. Auto Tuner Presets
Exit
2
(Remote co/ltrol unit)
Display to the Ext.ln Subwoofer Level screen.
I
3E'
I
"3-2, Ext. In Subwoofer LeveI_
Subwoof er Level < +15dB
@
(Remote contlol unit)
(Remote contlol unit)
Select the desired setting.
Select according to the specifications of the player being used. Also refer to the
player's operating instructions.
+15dB (default) recommended. (0, +5, +10 or +15 can be selected.)
Enter the setting.
The Input Setup Menu reappears.
• This setting assigns the color difference (component) vide() input jacks of the AVR-2805/985 for the different input sources.
1
2
(Remote control unit)
(Remote control unit)
Select "Component In Assign" at the Input Setup
Menu.
"3. Input Setup
1. Digital tn Assign
2. Ext. In Subw00fer Level
_3. Component in Assign
4. Video input Mode
5. Auto Tuner Presets
Exit
Display the Component In Assign screen.
:_:_[[:0 m F 0 t":@t":i; ][ t":
' :: 4 :[ I_
"3-3. Component In Assigr
F_]: NONE
E_: VIDEO 2
I_]: VIDEO 3
_: NONE
I_: NONE
F_0_]: NONE
Default _<
38