Denon AVR-3300 User Manual

HITACHI A
——
32
ENGLISH
“VCR”
(DIRECT)
MITSUBISHI A
PANASONIC A
JVC (VICTOR) A
SONY A
PIONEER
TOSHIBA A
SANYO A
SHARP A
NEC A
PHILIPS A
RCA A
GENERAL
ELECTRIC A
NAGNAVOX A
(STEREO)
—
HITACHI B
MITSUBISHI B
PANASONIC B
JVC (VICTOR) B
SONY B
—
TOSHIBA B
SANYO B
SHARP B
NEC B
PHILIPS B
RCA B
GENERAL
ELECTRIC B
NAGNAVOX B
(EXT. IN)
—
—
MITSUBISHI C
PANASONIC C
JVC (VICTOR) C
SONY C
—
—
—
—
NEC C
PHILIPS C
—
—
NAGNAVOX C
B
A
q (DVD)
w (VDP)
e (TUNER)
r (TV/DBS)
t
y (PHONO)
u (VCR-1)
i (CD)
o (MD/TAPE)
p
(SHIFT)
(CHANNEL +)
(CHANNEL –)
(A/B)
(VCR-2/V.AUX)
DIRECT
STEREO
EXT.IN
SHIFT
CHANNEL
+
CHANNEL
–
*
Preset codes set upon shipment from the factory and when reset
“TV”
(DIRECT)
DENON/HITACHI
MITSUBISHI A
PANASONIC A
JVC (VICTOR)
SONY
PIONEER
TOSHIBA
SANYO
SHARP
NEC
PHILIPS A
RCA A
GENERAL
ELECTRIC A
NAGNAVOX A
(STEREO)
—
—
MITSUBISHI B
PANASONIC B
—
—
—
—
—
—
—
—
—
GENERAL
ELECTRIC B
—
(EXT. IN)
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
B
A
q (DVD)
w (VDP)
e (TUNER)
r (TV/DBS)
t
y (PHONO)
u (VCR-1)
i (CD)
o (MD/TAPE)
p
(SHIFT)
(CHANNEL +)
(CHANNEL –)
(A/B)
(VCR-2/V.AUX)
DIRECT
STEREO
EXT.IN
SHIFT
CHANNEL
+
CHANNEL
–
NOTES:
• The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidental operation, cover the remote control
unit’s transmitting window while setting the preset memory.
• Some models and years of manufacture of components of the manufacturers listed on Table 1 cannot be used.
• The signals stored at “learned” buttons have priority over the preset codes. If you wish to clear the “learned” signals, do so as described on
page 37.
• Some manufacturers use different types of remote control codes for their products. If the component does not operate when set to remote
codeset A, try setting to the B or C codesets.

Denon AVR-3300 Specifications

Audio Specifications

rated output (front)	105 W + 105 W (8 Ω, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
rated output (center)	105 W (8 Ω, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
dynamic power	140 W x 2 ch (8 Ω)
input sensitivity / input impedance	200 mV / 47 kΩ
frequency response (analog)	10 Hz ~ 50 kHz: +0, –3 dB (DIRECT mode)
S/N (analog)	102 dB (DIRECT mode)
distortion (analog)	0.01% (20 Hz ~ 20 kHz) (DIRECT mode)
D/A output (rated)	2 V (at 0 dB playback)
total harmonic distortion (digital)	0.008% (1 kHz, at 0 dB)
S/N ratio (digital)	102 dB
dynamic range (digital)	96 dB
phono input sensitivity	2.5 mV
RIAA deviation	±1 dB (20 Hz to 20 kHz)
signal-to-noise ratio (phono)	74 dB (A weighting, with 5 mV input)
distortion factor (phono)	0.03% (1 kHz, 3 V)

Video Specifications

input / output level and impedance (standard video)	1 Vp-p, 75 Ω
frequency response (standard video)	5 Hz ~ 10 MHz — +0, –3 dB
input / output level and impedance (S-video)	Y signal — 1 Vp-p, 75 Ω; C signal — 0.286 Vp-p, 75 Ω
frequency response (S-video)	5 Hz ~ 10 MHz — +0, –3 dB
input / output level and impedance (color component video)	Y signal — 1 Vp-p, 75 Ω; Cb/Cr signal — 0.7 Vp-p, 75 Ω
frequency response (color component video)	5 Hz ~ 20 MHz — +0, –3 dB

Tuner Specifications

receiving range (FM)	87.50 MHz ~ 107.90 MHz
receiving range (AM)	520 kHz ~ 1710 kHz
usable sensitivity (FM)	1.0 µV (11.2 dBf)
50 dB quieting sensitivity (MONO)	1.6 µV (15.3 dBf)
S/N (IHF-A) (MONO)	80 dB
total harmonic distortion (MONO)	0.15% (at 1 kHz)

General Specifications

power supply (North America model)	AC 120 V, 60 Hz
power consumption (North America model)	5.6 A
maximum external dimensions	434 (W) x 171 (H) x 416 (D) mm
weight	15.0 kg (33 lbs 2 oz)
batteries (remote control)	R6P/AA Type (two batteries)
external dimensions (remote control)	70 (W) x 215 (H) x 24 (D) mm
weight (remote control)	200 g (Approx. 7 oz) (including batteries)