Denon AVR-3312CI

138
Surround
Surround mode (vpage55)
NOTE
Input signal types and formats
ANALOG
PCM DTS-HD DTS DOLBY DOLBY DIGITAL
PCM
(multi ch)
PCM
(2ch)
DTS-HD
Master Audio
DTS-HD High
Resolution
Audio
DTS
EXPRESS
DTS ES
DSCRT
(With Flag)
DTS ES
MTRX
(With Flag)
DTS
(5.1ch)
DTS 96/24
DOLBY
TrueHD
DOLBY
DIGITAL Plus
DOLBY
DIGITAL EX
(With Flag)
DOLBY
DIGITAL EX
(With no
Flag)
DOLBY
DIGITAL
(5.1/5/4/3ch)
DOLBY
DIGITAL (2ch)
DOLBY SURROUND
DOLBY TrueHD
z1 F
DOLBY DIGITAL+
z1 F
DOLBY DIGITAL EX
z2z3 S S S
DOLBY (D+) (HD) +EX
z2z3 S S
DOLBY DIGITAL
z1 S F F
DOLBY (D) (D+) (HD) +PLgx CINEMA z2z4 S S F D S S
DOLBY (D) (D+) (HD) +PLgx MUSIC z2z3 S S S S S
DOLBY (D) (D+) (HD) +PLgz z5 S S S S S
DOLBY PRO LOGIC gx CINEMA z2z3 S S S
DOLBY PRO LOGIC gx MUSIC z2z3 S S S
DOLBY PRO LOGIC gx GAME z2z3 S S S
DOLBY PRO LOGIC gz z2z5 S S S
DOLBY PRO LOGIC g CINEMA z1 S S S
DOLBY PRO LOGIC g MUSIC z1 S S S
DOLBY PRO LOGIC g GAME z1 S S S
DOLBY PRO LOGIC
z1 S S S
DOLBY PRO LOGIC g CINEMA A-DSX S S S
DOLBY PRO LOGIC g MUSIC A-DSX S S S
DOLBY PRO LOGIC g GAME A-DSX S S S
DOLBY PRO LOGIC A-DSX
S S S
Audyssey DSX™
S S S S S
z1 The same was when “Audyssey DSX™” (vpage102) setting is set to “ON”.
z2 This surround mode can be selected when “Amp Assign” (vpage105) is set to “NORMAL”.
z3 If “Speaker Config.” – “Surr.Back” (vpage106) is set to “None”, this surround mode cannot be selected.
z4 If “Speaker Config.” – “Surr.Back” (vpage106) is set to “1spkr” or “None”, this surround mode cannot be selected.
z5 If “Speaker Config.” – “Front Height” (vpage106) is set to “None”, this surround mode cannot be selected.
Basic version
Advanced version
InformationInformation