127
Inputs
Hide Sources
Default settings are underlined.
Remove from the display input sources that are not used.
Setting details
CBL/SAT / DVD / Blu-ray / GAME / AUX1 / AUX2 / MEDIA PLAYER / iPod/USB / CD / HDRadio /
NETWORK / TV AUDIO / PHONO : Select input source that is not used.
•Show : Use this source.
•Hide : Do not use this source.
NOTE
•Input sources being used in the MAIN ZONE, ZONE2 or ZONE3 cannot be selected.
•Input sources being used in the various zones cannot be deleted.
•Input sources set to “Hide” cannot be selected using the input source select button.
Source Level
Default settings are underlined.
•This function corrects the playback level of the selected input source’s audio input.
•Make this setting if there are differences in the input volume levels between the different sources.
Setting details
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which “DIGITAL” is assigned at “Input Assign” (vpage125).
Input Select
Default settings are underlined.
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items Setting details
Input Mode
Set the audio input modes
for the different input
sources.
It is normally recommended
to set the audio input mode
to “Auto”.
Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input.
Analog : Play only signals from analog input.
•“Digital” can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” (vpage126).
•If the input source is set to “CBL/SAT”, “DVD”, “Blu-ray”, “AUX1”,
“AUX2” or “CD”, it can be set to “Analog”.
•When digital signals are properly input, the indicator lights on
the display. If the indicator does not light, check “Input Assign”
(vpage126) and the connections.
•If “HDMI Control” is set to “On” and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is “TV” is fixed to ARC.
Decode Mode
Set the audio decode mode
for input source.
CBL/SAT
DVD
Blu-ray
GAME
AUX1
AUX2
MEDIA PLAYER
CD
TV AUDIO
Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.
•This item can be set for input sources for which “DIGITAL” is assigned
at “Input Assign” (vpage125).
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when
inputting the corresponding input signal.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
