Denon AVR-3313CI

85
Speaker connection
Connecting 7.1-channel speakers using
surround back, front height, and front wide
speakers
The illustration on the right shows a connection example for
performing 7.1-channel playback using the surround back, front height
or front wide speakers.
If you connect the surround back, front height and front wide speakers
before you start playback, the audio is played back by automatically
switching the speakers in accordance with the surround mode or input
signals.
To perform 7.1-channel playback using the surround back, front height
or front wide speakers, set “Assign Mode” to “Main Only” in steps 3
to 5 for “Set up “Amp Assign”” (vpage92).
Cables used for connections
Audio cable (sold separately)
Speaker
cable
Subwoofer
cable
NOTE
•For speaker cable connections, see page84.
•For speaker impedance , see page84.
FL FR
C
SL
SR
SW
FWR
FWL
FHRFHL
SBL SBR
Basic version
Advanced version
Informations
Advanced version
DVD