Denon AVR-3803

1
Press the power ON/SOURCE button and the OFF button at
the same time.
• "PRE" appears on the remote control unit's display.
OFF 0N/S_JR_
Use the • and • cursor buttons to display "BKLT" on the
remote control unit, then press the ENTER button.
• "05SEC" appears on the remote control unit's display.
Use the • and • cursor buttons to adjust the lighting time (3
sec _ 30 sec), then press the ENTER button.
• "OK" is displayed and that lighting time is set.
1
2,3
m m _1_
I--
o_
1
2,3
(1) Resetting the preset memory
Press the power ON/SOURCE button and the OFF button at
the same time.
• "PRE" appears on the remote control unit's display.
Use the • and • cursor buttons to display "RST" on the
remote control unit, then press the ENTER button.
2,3,4
o _NON
r_[-s21
1
2,3,5
42