Denon AVR-4806 - Easy Setup and Operation: Speaker Connections; Speaker Connections and Safety Notes; Speaker Impedance and Protector Circuit

- 15 -
EVENT PARAMETER
function example *RES.
TF ****** (6 digits) TUNER Frequency change TF105000<CR>
--- ****.** kHz at AM band (1050.00kHz at AM)
****.** MHz at FM band
XM***
(channel No.)
--- *** at XM mode TFXM001<CR>
(channel 1 at XM)
TP **(PRESET No.) TUNER PRESET change to No.** TPA1<CR>
(PRESET No.”A1”)
TM TUNER BAND , MODE change
AM ---Band set to AM TMAM<CR>
FM ---Band set to FM TMFM<CR>
XM ---Band set to XM TMXM<CR>
AUTO ---Tuning mode set to AUTO mode TMAUTO<CR> *
MANUAL ---Tuning mode set to MANUAL mode TMMANUAL<CR> *
*RES. : NOT returns '*' parameters as RESPONSE.