How to fix 'OFF AIR' displayed in XM mode on my Denon AVR-587 Stereo Receiver?
If “OFF AIR” is displayed in the XM mode, it means the selected channel is not currently broadcasting. Select another channel.
Why are no test tones produced on my Denon AVR-587?
If no test tones are being produced, it could be because the surround mode is set to a mode other than STANDARD (Dolby/DTS Surround). Set it to STANDARD (Dolby/DTS Surround).
What to do if my Denon AVR-587 Stereo Receiver is receiving only XM channels 0 and 1?
If the Denon Stereo Receiver is only receiving XM channels 0 and 1, the XM Tuner is not activated. Contact XM Radio.
General| Channels | 7.1 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kOhms |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| Digital Sound Processor (DSP) | Yes |
| Frequency Response | 10Hz - 100kHz |
| Inputs | 7 x HDMI, Component video, composite video, digital audio (optical), digital audio (coaxial), audio line-in |
| Outputs | 1 x HDMI, component video, composite video, headphones |
| Audio Formats Supported | Dolby Digital, DTS |
| Surround Sound Effects | Dolby Pro Logic IIx, DTS Neo:6 |
| Input Device | Remote control |
| Tuner Frequency Range | AM: 520 - 1710 kHz, FM: 87.5 - 108 MHz |
| Dimensions (W x H x D) | 434 x 171 x 417 mm |
| Power Output (per channel) | 110 Watts @ 8 Ohms |
| Amplifier Output Details | 110W per channel (8 ohms, 20Hz - 20kHz, 0.08% THD) |
Warning about not opening the unit to avoid electric shock and accessing internal parts.
Warning about not exposing the appliance to rain or moisture to prevent fire or shock.
Important safety and operating instructions for product use and maintenance.
Compliance with FCC rules for Class B digital devices and managing radio frequency interference.
Guidelines for safe operation including temperature, moisture, and foreign object avoidance.
List of included accessories and essential checks before operating the unit.
Precautions for unit placement and overview of the remote control's functions.
Identification of front panel controls, indicators, and display elements.
Basic speaker layout and detailed connection instructions.
Connecting source components and initial steps for playing input sources.
Information on remote control operating range and battery insertion/usage notes.
Night mode settings and user mode/memory functions for storing settings.
Function to match audio/video sources and personal memory plus feature.
Installation cautions, remote control unit overview, and battery handling.
Identification and description of the front panel controls and indicators.
Explanation of the unit's display indicators and information.
Identification and detailed description of the front panel controls.
Explanation of the unit's display indicators and information.
Symbols and types of cables used for audio and video connections.
Identification and description of the rear panel connections.
Overview of the remote control unit's buttons and their functions.
Guide on how to connect a DVD player and monitor to the receiver.
Overview of the remote control unit's rear buttons and functions.
Recommended speaker placement and connection instructions.
Instructions and important notes for connecting speakers to the unit.
Symbols and types of cables used for audio and video connections.
Guide for connecting a TV or DBS tuner to the receiver.
Connecting multi-channel audio sources via external input terminals.
Connecting video cameras or game consoles to the receiver.
Initial checks before operation and how to select input sources.
Instructions for connecting a CD player for digital audio output.
Connecting tape decks, CD recorders, or MD recorders.
Connecting a VCR for analog dubbing and video signal input.
Connecting FM and AM antennas for radio reception.
Instructions for assembling and connecting the AM loop antenna.
Connecting the XM Passport System for satellite radio service.
Playing music from an iPod connected via the Control Dock.
Connecting speakers for multi-zone audio and using surround back for ZONE2.
Instructions for connecting the unit to the AC power outlet.
Overview of system setup options and their default configurations.
Setting speaker configuration, subwoofer mode, distance, crossover, and test tone.
Assigning digital inputs, iPod signals, and setting auto preset memory.
Setting power amp assignment, volume limits, and auto surround mode.
Front display examples and step-by-step guide to navigating setup menus.
Setting speaker properties and subwoofer playback method.
Adjusting speaker timing, bass frequency, and volume balance.
Assigning input sources to digital input terminals.
Setting speaker output components and subwoofer playback method.
Optimizing audio timing and setting bass output frequency.
Adjusting speaker volumes and assigning digital input sources.
Optimizing audio timing and setting bass output frequency.
Adjusting speaker volumes for balanced sound output.
Adjusting speaker volumes and assigning digital input sources.
Assigning iPod signals and setting EXT. IN subwoofer level.
Automatically searching and storing FM broadcast stations.
Assigning iPod audio/video signals to input terminals.
Setting playback level for analog signals to the EXT. IN subwoofer.
Automatically searching and storing FM broadcast stations.
Assigning surround back channel amplifier to ZONE2.
Setting volume limits, power-on volume, and mute levels.
Storing the last played surround mode for input signals.
Storing the last played surround mode for input signals.
How to select input sources and input modes.
Precautions for optimal playback of DTS sources and notes on EXT. IN mode.
Temporarily muting audio, connecting headphones, and adjusting display brightness.
Overview of available surround modes and their optimal sources.
Playback modes for stereo, monaural, Denon original, and DTS NEO:6 sources.
Using Dolby Pro Logic IIx and selecting between DIRECT/STEREO for music.
Selecting Dolby Digital and DTS surround modes for digital inputs.
Automatic correction of signal level for Dolby Digital sources.
Using Dolby Pro Logic IIx for analog and digital stereo surround playback.
Using DTS NEO:6 for stereo surround playback.
Using Neural Surround mode for XM HD Surround sources.
Chart detailing channel output and parameter adjustability for surround modes.
Table showing surround mode availability based on input signal types.
Explanation of DIRECT, DSP SIMULATION, and STEREO playback modes.
Explanation of Denon's proprietary surround sound modes.
Operating surround modes and parameters via the remote control.
Adjusting bass, treble, and individual speaker volume levels.
Tuning into radio stations and automatically storing presets.
Tuning stations, storing presets, and recalling stored stations.
Introduction to XM Satellite Radio service and its features.
Checking XM signal, selecting channels, and searching by category.
Night mode settings and storing/recalling user settings.
Storing specific settings and matching audio/video sources.
Playing music from an iPod connected via the Control Dock.
iPod music playback controls including browse, pause, search, and shuffle.
Viewing photos and videos from an iPod on a monitor.
Safe procedure for disconnecting the iPod from the unit.
Setting up and using the multi-zone audio system.
Using the remote to select sources for multi-zone playback.
Recording audio/video signals and overview of memory functions.
Procedure to reset the unit to factory default settings.
Operating Denon audio components using the remote control.
Storing device codes for remote control operation.
Operating a component after storing its preset code.
Table showing button functions for various operated devices.
Table showing button functions for various operated devices.
Enabling cross-operation of components in different modes.
Enabling cross-operation of components in different modes.
Benefits and placement of surround back speakers, and layout examples.
Explanation of Dolby, DTS, and Neural surround sound technologies.
Initial troubleshooting steps and common problem checks.
Table listing common symptoms, causes, and corrective measures.
Technical specifications for the audio amplifier and tuner sections.
General specifications including power, dimensions, and remote control details.
Detailed explanations of Dolby Pro Logic II/IIx, DTS-ES, and DTS 96/24 technologies.
Technical specifications for various sections of the unit and remote control.
Lists of preset codes for DVD players, VDPs, and VCRs by brand.
Lists of preset codes for CD, CDR, MD, and Tape decks by brand.
Lists of preset codes for TVs, Cable, and Satellite devices by brand.
Lists of preset codes for TVs, Cable, and Satellite devices by brand.
Lists of preset codes for TVs, Cable, Satellite, and DVD devices by brand.
List of preset codes for DVD players by brand.
To Next Page
