EasyManuals Logo

Denon AVR-791 User Manual

Denon AVR-791
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
19
ENGLISH
Advanced versionSimple version InformationBasic version
Connecting a CD player
You can enjoy CD sound.
Select the connector to use and connect the device.
Cables used for connections
Audio cable (sold separately)
Audio cable
(White)
(Red)
R
L
R
L
R
L
R
L
AUDIO
AUDIO
RL
OUT
CD player
Set this to change the digital input connector to which the input
source is assigned.
“Input Assign” (vpage44)
in Set as Necessary
Connecting an antenna
Connect the FM antenna or AM loop antenna included with the unit to enjoy listening to radio broadcasts.
After connecting the antenna and receiving a broadcast signal (vpage24 “Listening to FM/AM broadcasts”), use tape to fix the antenna in a
position where noise is the lowest.
w eq
FM outdoor
antenna
75 Ω Coaxial
cable
Ground
AM outdoor
antenna
AM loop antenna
(supplied)
Black
White
FM indoor
antenna
(supplied)
n AM loop antenna assembly
1
Put the stand section
through the bottom of the
loop antenna from the
rear and bend it forward.
Stand
Square
hole
Projecting
part
Loop
antenna
2
Insert the projecting part
into the square hole in
the stand.
n Using the AM loop antenna
To use suspended on a wall
Suspend directly on the wall without
assembling.
Nail, tack, etc.
To use standing alone
Use the procedure below to assemble.
NOTE
Do not connect two FM antennas simultaneously.
Even if an external AM antenna is used, do not disconnect the AM
loop antenna.
Make sure the AM loop antenna lead terminals do not touch metal
parts of the panel.
If the signal has noise interference, connect the ground terminal
(GND) to reduce noise.
If you are unable to receive a good broadcast signal, we recommend
installing an outdoor antenna. Inquire at the retail store where you
purchased the unit for details.

Table of Contents

Other manuals for Denon AVR-791

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-791 and is the answer not in the manual?

Denon AVR-791 Specifications

General IconGeneral
Number of Channels7.1
HDMI Inputs4
HDMI Outputs1
Audyssey TechnologiesAudyssey MultEQ, Audyssey Dynamic Volume, Audyssey Dynamic EQ
4K Pass-ThroughNo
Signal-To-Noise Ratio100 dB
HDMI SwitchingYes
Input Sensitivity200 mV
THD0.08%
Surround Sound EffectsYes
Digital Sound Processor (DSP)Yes
DSP Preset Qty7
Tuner BandsAM/FM
Preset Station Qty56
Auto Preset MemoryYes
HDMI Pass-ThroughYes
Frequency Response10Hz-100kHz
Power Output90 W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Dolby TechnologiesDolby Digital Plus, Dolby TrueHD
DTS TechnologiesDTS, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Neo:6
Response Bandwidth10 - 100000 Hz
Input Impedance47 kΩ
Audio D/A Converter24-bit / 192kHz
DSP PresetsRock Arena, Jazz Club, Mono Movie, Matrix, Virtual, Game
Tuning RangeAM: 520 - 1710 kHz, FM: 87.5 - 108 MHz
Connector TypeHDMI
Amplifier Output Details90W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Video ConversionYes (Composite to HDMI)

Related product manuals