23
ENGLISH
Advanced versionSimple version InformationBasic version
Playing an iPod
®
4
Press SEARCH and hold it down for 2 seconds or
more to select the display mode.
• There are two modes for display the contents recorded on the iPod.
Browse mode
Display iPod information on the TV screen.
• English letters, numbers and certain symbols are displayed.
Incompatible characters are displayed as “.” (period).
Remote mode
Display iPod information on the iPod screen.
• “Remote iPod” is displayed on the display of this unit.
• The Remote mode is not supported on fifth generation iPod or
first generation iPod nano.
Display mode
Browse mode Remote mode
Playable
files
Music file
P P
Video file
z
Active
buttons
Remote
control unit
(This unit)
P P
iPod
®
P
z Only the sound is played.
5
Use ui to select the item, then press ENTER or p
to select the le to be played.
6
Press ENTER, p or 1.
Playback starts.
n iPod operation
Operation buttons Function
MENU Amp menu
uio p
Cursor operation
ENTER Enter setting
SEARCH
(Press and release)
Page search mode
SEARCH
(Press and hold)
Browse / Remote mode switching
RETURN Return
6 7
(Press and hold)
Manual search
(fast-reverse/fast-forward)
1
Playback / Pause
8 9
Auto search (cue)
3
Pause
2
Stop
RESTORER RESTORER
TV POWER TV power on/standby (Default : SONY)
TV INPUT Switch TV input (Default : SONY)
• Repeat playback (vpage46 “Repeat”)
• Shuffling playback (vpage46 “Shuffle”)
• The time (default: 30 sec) for which the on-screen display are
displayed can be set at menu “iPod” (vpage57). Press uio p to
return to the original screen.
• To play back compressed audio with extended bass or treble
reproduction, we recommend playback in RESTORER mode
(vpage51). The default setting is “Mode 3”.
• In Browse mode, press
STATUS during
playback to check the title name, artist
name, and album name.
NOTE
• Depending on the type of iPod and the software version, some
functions may not operate.
• Note that DENON will accept no responsibility whatsoever for any
problems arising with the data on an iPod when using this unit in
conjunction with the iPod.
iPod play function
If iPod PLAY is pressed when power of this unit is on standby and a
control dock for iPod or an iPod is connected, the iPod starts playback.
Press iPod PLAY.
• Power of this unit is turned on.
• This unit’s input source switches to
“DOCK” or “USB/iPod”.
• iPod playback starts.
If iPod PLAY on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
NOTE
• iPod play function does not function if a control dock for iPod
(“DOCK”) or an iPod (“USB/iPod”) is not connected.
• If both a control dock for iPod (“DOCK”) and an iPod (“USB/iPod”)
are connected, playback with control dock for iPod (“DOCK”) takes
priority.
To Next Page
Loading...
Need help?
General
