Denon AVR-791 User Manual

71
ENGLISH
Basic version Advanced versionSimple version Information
Surround
Surround mode (vpage26)
Surround Parameter (vpage47)
Tone
z15
(vpage49)
Audyssey Settings
z20
(vpage49)
RESTORER
z19
(vpage51)
AFDM
z12
(vpage48)
S.Back
(vpage48)
Front Height
z13
(vpage48)
Height Gain
(vpage49)
Subwoofer
(vpage49)
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama
(vpage48)
Dimension
(vpage48)
Center Width
(vpage48)
Center Image
(vpage47)
MultEQ
®
(vpage49)
Dynamic EQ
®
z17
(vpage50)
Dynamic
Volume™
z18
(vpage50)
PURE DIRECT
S
z3
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel)
STEREO
S S S S S
MULTI CH IN
S S S S
z14
S S S S
DOLBY PRO LOGIC gz S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S S
DTS NEO:6
S S S S S S S
DOLBY DIGITAL
S S S S
z14
S S S S
DOLBY DIGITAL Plus
S S S S
z14
S S S S
DOLBY TrueHD
S S S S
z14
S S S S
DTS SURROUND
S S S S
z14
S S S S
DTS 96/24
S S S S
z14
S S S S
DTS-HD
S S S S
z14
S S S S
DTS Express
S S S S
z14
S S S S
MULTI CH STEREO
S S S S S S S
ROCK ARENA
S S S
z16
S S S S
JAZZ CLUB
S S S S S S S
MONO MOVIE
S S S S S S S
VIDEO GAME
S S S S S S S
MATRIX
S S S S S S S
VIRTUAL
S S S S S
z3 Only when “Subwoofer Mode” is set to “LFE+Main” (vpage53), sound is output from the subwoofer.
z12 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played.
z13 If “Speaker Config.” – “Front Height” (vpage53) is set to “None”, this item cannot be selected.
z14 This item can be selected when “Surround Parameter” – “Front Height” (vpage48) is set to “ON”.
z15 This item cannot be set when “Dynamic EQ” (vpage50) is set to “ON”.
z16 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z17 This item cannot be set when “MultEQ” (vpage49) is set to “OFF” or “Manual”.
z18 This item cannot be set when “Dynamic EQ” (vpage50) is set to “OFF”.
z19 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z20 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.

Denon AVR-791 Specifications

General

Number of Channels	7.1
HDMI Inputs	4
HDMI Outputs	1
Audyssey Technologies	Audyssey MultEQ, Audyssey Dynamic Volume, Audyssey Dynamic EQ
4K Pass-Through	No
Signal-To-Noise Ratio	100 dB
HDMI Switching	Yes
Input Sensitivity	200 mV
THD	0.08%
Surround Sound Effects	Yes
Digital Sound Processor (DSP)	Yes
DSP Preset Qty	7
Tuner Bands	AM/FM
Preset Station Qty	56
Auto Preset Memory	Yes
HDMI Pass-Through	Yes
Frequency Response	10Hz-100kHz
Power Output	90 W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Dolby Technologies	Dolby Digital Plus, Dolby TrueHD
DTS Technologies	DTS, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Neo:6
Response Bandwidth	10 - 100000 Hz
Input Impedance	47 kΩ
Audio D/A Converter	24-bit / 192kHz
DSP Presets	Rock Arena, Jazz Club, Mono Movie, Matrix, Virtual, Game
Tuning Range	AM: 520 - 1710 kHz, FM: 87.5 - 108 MHz
Connector Type	HDMI
Amplifier Output Details	90W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Video Conversion	Yes (Composite to HDMI)