To Next PageTo Next PageWhy won't my Denon AVR-890 Stereo Receiver power on?
If your Denon Stereo Receiver isn't powering on, or turns off immediately after being turned on, check the power cord connection to ensure it's properly inserted.
Why is the display off on my Denon AVR-890 Stereo Receiver?
If the display on your Denon Stereo Receiver is off, check the following: * **Dimmer Setting:** Ensure the “Dimmer” setting is not set to “OFF”. Change it to something else. * **PURE DIRECT Mode:** If PURE DIRECT mode is enabled, select a different surround mode.
How do I get sound from my monitor when using HDMI with my Denon Stereo Receiver?
If you're not getting sound from the monitor connected via HDMI to your Denon Stereo Receiver, and the “HDMI Audio Out” setting (in “Manual Setup” – “HDMI Setup”) is set to “Amp”, change it to “TV”.
What does 'CHECK SIRIUS TUNER' mean on my Denon AVR-890?
If your Denon Stereo Receiver displays “CHECK SIRIUS TUNER”, it indicates that the SiriusConnect Home Tuner unit is not connected. Verify that the connections are correct.
What does 'ANTENNA ERROR' mean on my Denon Stereo Receiver?
If your Denon Stereo Receiver displays “ANTENNA ERROR”, it means the antenna is not connected. Check that the connections are correct.
General| Type | AV Receiver |
|---|---|
| Number of channels | 7.1 |
| HDMI inputs | 4 |
| HDMI outputs | 1 |
| Component video inputs | 3 |
| Component video outputs | 1 |
| Analog audio inputs | 7 |
| Headphone output | Yes |
| THD | 0.08% |
| Tuner | AM/FM |
| Frequency Response | 10 Hz - 100 kHz (+1, -3 dB) |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity/Impedance | 200 mV / 47 k ohms |
| Signal-to-Noise Ratio | 100 dB |
| Weight | 11.5 kg |
| Tuner Frequency Range | FM: 87.5 - 107.9 MHz, AM: 520 - 1710 kHz |
| Digital audio inputs | 2 Optical, 1 coaxial |
Essential safety warnings and guidelines for operating the unit safely.
Critical instructions to ensure safe operation and prevent potential hazards.
Configuring amplifier output signals for different speaker layouts.
How to connect speaker cables, including protection circuit notes.
Step-by-step guide for performing the automated speaker setup process and preparations.
Visual examples of speaker placement for height and surround back configurations.
Connecting the calibrated setup microphone for the auto setup process.
Setting the signal output for surround back/amp assign terminals.
Choosing which speakers to measure for the auto setup process.
The process of detecting speakers, performing sound measurements, and analyzing data.
Reviewing the results of speaker configuration and level checks.
Saving the optimized settings and exiting the Audyssey Auto Setup menu.
Common error messages and their causes/solutions during the setup.
Checking specific measurement results like speaker configuration, levels, and EQ.
Manually adjusting speaker settings like size, distance, and levels.
Detailed manual adjustments for speaker configuration, bass, and distance.
Configuring ZONE2 audio playback and other system options.
Adjusting individual speaker levels and crossover frequencies manually.
Configuring front speaker settings for different playback modes.
Configuring HDMI range, lip sync, audio output, and control functions.
Adjusting analog subwoofer levels and audio playback settings.
Setting volume levels, display modes, and power-on levels for ZONE2.
Adjusting volume controls, source deletion, screensaver, and wallpaper.
Assigning input sources to specific physical terminals.
Adjusting video output settings like resolution and aspect ratio.
Configuring input modes, decoding, and renaming input sources.
Sequence of operations for starting playback from various sources.
Instructions for playing Blu-ray/DVD players and iPods.
How to select and adjust surround modes, and mute audio.
Selecting surround modes for multichannel and 2-channel audio sources.
Showing the currently active surround sound mode.
Using DENON's proprietary surround sound modes.
Bypassing tone controls for high-quality audio playback.
Playing audio in stereo with adjustable tone controls.
Experiencing the most faithful sound reproduction with Pure Direct mode.
Using MultEQ for automatic speaker equalization and room correction.
Optimizing sound with Dynamic EQ and Dynamic Volume for consistent audio.
Solutions for common issues like no power, no sound, or unit malfunction.
Troubleshooting issues with the remote control and unit display.
Resolving issues with sound output from speakers and monitor connections.
Troubleshooting video display problems and recording functionality.
Solutions for issues related to HDMI audio/video output and connectivity.
Diagnosing and resolving problems with SIRIUS radio reception and iPod connectivity.
Restoring the unit to its default settings by resetting the microprocessor.
Detailed specifications for audio, video, tuner, power, and dimensions.
Resolving sound issues for center, surround, surround back speakers, and subwoofer.
Fixing video display errors and issues with recording functionality.
