79
Room EQ /
Tone control setting
• Use the Room EQ setting and the tone control setting to adjust the bass and treble as desired.
• Operate the Room EQ and the tone control from the remote control unit.
1
Press the surround parameter button.
Display the surround parameter
screen.
The screen selected surround
mode appears.
“TONE” cannot be selected in the
Direct mode.
2
Select “EQ / TONE”.
3
Display the Room RQ / Tone Control
screen.
(Remote control unit)
(Remote control unit)
(Remote control unit)
ROOM: Medium
*Surr Parameter
4
Select the Equalizer setting.
(Remote control unit)
Room EQ Normal
*Room EQ/Tone
OFF Normal Front
Manual Flat
NOTES:
• The equalizer setting of Normal, Flat, and Front can be selected
after performing the Auto Setup.
• When headphone is connected, the Room EQ cannot be used.
5
Select Tone Defeat OFF.
(Remote control unit)
Tone Def.: OFF
*Room EQ/Tone
To Next Page
Loading...
Need help?
General
