80
6
7
Enter the setting.
The surround parameter menu
screen reappears.
Select Bass or Treble. Set the level.
(Remote control unit)
(Remote control unit) (Remote control unit)
8
If the setting ends, press the “ENTER”
or “SURROUND PARAMETER” button
again.
(Remote control unit)
• Operate the Room EQ from the main unit.
1
Press the surround parameter button.
Display the surround parameter screen.
2
Select “EQ”
(Main unit)
(Main unit)
Room EQ OFF
*Surr Parameter
3
Select the Equalizer setting.
(Main unit)
• Operate the tone control from the main unit.
1
The tone switches as follows each time
the TONE CONTROL button is pressed.
(Main unit)
1
TREBLE
0
BASS
2
Select with the name of the volume to be adjusted and adjust the level.
• To increase the bass or treble:
Turn the control clockwise. (The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.)
• To decrease the bass or treble:
Turn the control clockwise. (The bass or treble sound can be decreased up to –6 dB in steps of 1 dB.)
To Next Page
Loading...
Need help?
General
