To Next PageTo Next PageWhy are the instrument positions reversed during stereo playback on my Denon Receiver?
If the instrument positions are reversed during stereo playback on your Denon Receiver, it's likely due to reversed connections. Check the left and right connections of your speakers and input/output cords.
General| Type | AV Receiver |
|---|---|
| Audio Channels | 7.1 |
| Amplifier Type | Discrete |
| Input Sensitivity/Impedance | 200 mV / 47 k ohms |
| Component Video Inputs | 3 |
| Digital Audio Inputs (Coaxial) | 2 |
| Frequency Response | 10Hz - 100kHz |
| HDMI Inputs/Outputs | 1 out |
| Surround Sound Formats | Dolby Digital, Dolby Digital EX, DTS, DTS-ES, Dolby Pro Logic IIx |
| Video Inputs/Outputs | S-Video: 4 in / 2 out |
| Power Output | 110 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven) |
| Dimensions (W x H x D) | 17.1 x 5.9 x 16.3 inches (434 x 151 x 416 mm) |
Guidelines and warnings for safely installing the AV receiver to prevent interference and ensure proper function.
Instructions for safely handling the unit, including power connections and muting circuits, to prevent damage or hazards.
Explanation of Dolby Digital technology for 5.1 channel surround sound, used in DVD and digital TV broadcasts.
Description of DTS surround sound format, providing 5.1 channel high fidelity audio from sources like laser disc and DVD.
Detailed instructions for connecting various audio sources like CD players and turntables to the receiver.
Guidance on connecting video sources such as TV, DVD players, and video decks using composite, S-Video, and component connections.
Identification and explanation of buttons and jacks on the front panel of the AV receiver.
Explanation of the indicators and information displayed on the receiver's screen during operation.
Procedure for automatic speaker system analysis and acoustic room measurement for optimal sound settings.
Configuration of speaker types, sizes, and distances for accurate surround sound playback.
Assignment of digital input jacks, subwoofer levels, component video, and auto tuner presets for various sources.
Instructions for correctly inserting batteries into the remote control unit for proper operation.
Procedure to program the remote control to operate other AV components by learning their signals.
Preliminary checks and steps required before operating the AV receiver, including connections and power.
How to select and play audio and video sources using different input modes like AUTO, PCM, DTS, and ANALOG.
Enabling simultaneous playback of different sources in multiple rooms using ZONE2 outputs.
Steps to adjust playback levels using test tones for optimal surround sound performance.
Explanation of how to use Dolby Pro Logic IIx modes for enhanced surround sound from stereo sources.
Overview of available DSP surround modes like WIDE SCREEN, ROCK ARENA, and their intended use.
Adjusting room equalization and tone controls for bass, treble, and EQ curves to personalize sound.
Procedure for automatically searching and tuning FM/AM radio stations for listening.
Instructions for storing and recalling radio stations in the receiver's memory for quick access.
Guidance on selecting surround modes based on source types like movies, music, and games for best audio experience.
Explanation of surround back speaker setup and placement for enhanced 6.1-channel and 7.1-channel audio.
