Denon AVR-X1100W User Manual

Setting items Detailed items Description Page
.
Inputs
Input Assign Changes input connector assignment. 149
Source Rename Changes the display name for input source. 151
Hide Sources Removes from the display input sources that are not used. 151
Source Level Adjusts the playback level of the audio input. 151
Input Select Sets the audio input mode and decode mode. 152
.
Speakers
Audyssey
®
Setup
The acoustic characteristics of the connected speakers and listening room are
measured and the optimum settings are made automatically.
153
Manual Setup
Sets up the speakers manually or changes the Audyssey
®
Setup settings.
163
.
Network
Information Displays network information. 171
Connection Selects whether to connect the home network to a wireless LAN or a wired LAN. 171
Settings Used for manually setting the IP address or when using a proxy server. 174
IP Control Enables network communication in standby power mode. 175
Friendly Name The “Friendly Name” is the name of this unit displayed on the network. You can change
the Friendly Name according to your preferences.
176
Diagnostics Used to check the network connection.
176
Maintenance Mode Used when receiving maintenance from a Denon service engineer or custom installer.
This mode is not designed for use by the end user, and should only be used by a trained
service technician or custom installation professional.
177
Contents Connections Playback Settings Tips Appendix
129
Front panel Display Rear panel Remote Index

Denon AVR-X1100W Specifications

General

Receiver type	Surround
Audio output channels	7.1 channels
Power output per channel (1KHz@6 Ohm)	145 W
Power output per channel (20-20KHz@8 Ohm)	80 W
HDMI in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Headphone connectivity	6.3 mm
Connectivity technology	Wired
Speakers connectivity type	Banana connector/Binding posts
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Ethernet LAN	Yes
AM band range	522 - 1611 kHz
Supported radio bands	AM, FM
Optical drive included	No
Display	VFL
Product color	Black
Audio decoders	Dolby Digital 5.1, Dolby Digital EX, Dolby Pro Logic IIz, Dolby TrueHD, DTS 96/24, DTS Digital Plus, DTS-ES, DTS-HD Master Audio
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	430 W

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	151 mm
Weight	8600 g