Direct playback
Sound recorded in source is played as is.
1
Press PURE to select “Direct”.
Direct playback begins.
In Direct sound mode, the following items cannot be adjusted.
0
Tone
(
v
p. 103)
0
Restorer (v p. 139)
0
MultEQ
®
XT (v p. 141)
0
Dynamic EQ (v p. 142)
0
Dynamic Volume (
v
p. 143)
0
Manual EQ (v p. 143)
Auto surround playback
This mode detects the type of input digital signal, and automatically
selects the corresponding mode for playback.
Perform stereo playback when the input signal is PCM. When the input
signal is Dolby Digital or DTS, the music is played back according to the
respective channel number.
1
Press PURE to select “Auto”.
Auto surround playback begins.
Contents Connections Playback Settings Tips Appendix
108
Front panel Display Rear panel Remote Index
To Next Page
Loading...
