Denon AVR-X580BT User Manual

o
Operations accessible through the option
menu
0
“RDS search” (v p. 51)
0
“PTY search” (v p. 52)
0
“TP search” (v p. 53)
0
“Radio Text” (v p. 53)
0
“Tuning in to stations and presetting them automatically (Auto
Preset)” (v p. 54)
0
“Skipping preset broadcast stations (Preset Skip)” (v p. 56)
0
“Adjusting the tone (Tone)” (v p. 60)
0
“Displaying your desired video during audio playback (Video
Select)” (v p. 62)
RDS search
RDS (works only on the FM band) is a broadcasting service which allows
a station to send additional information along with the regular radio
program signal.
Use this function to automatically tune to FM stations that provide the RDS
service.
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press OPTION when the input source is “FM”.
The option menu screen is displayed.
2
Use ui to select “RDS Search”, then press ENTER.
3
Press ENTER.
The search for RDS stations begins automatically.
Contents Connections Playback Settings Tips Appendix
51
Front panel Display Rear panel Remote Index

Denon AVR-X580BT Specifications

General

Channels	5.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	90W
HDMI Inputs	5
HDMI Outputs	1
4K Pass-through	Yes
4K/60Hz Pass-through	Yes
4K/120Hz Pass-through	No
HDR Support	HDR10, HLG
Bluetooth	Yes
Dolby Vision	Yes
Audio Return Channel (ARC)	Yes
HDMI 2.1	No
HDCP 2.3 support	Yes
FM Tuner	Yes
AM Tuner	Yes
Wi-Fi	No
Dolby Atmos	No
DTS:X	No
Auto Speaker Calibration	No
Dimensions (W x H x D)	434 x 151 x 319 mm
Power Output per Channel	70W (8 ohms, 20 Hz - 20 kHz, 0.08% 2ch driven)
Dolby Audio	Dolby Digital, Dolby Digital Plus, Dolby TrueHD
DTS Audio	DTS-HD Master Audio