Denon AVR-X7200W Product Guide

Upgrades/Updates (1 of 2)
HOME
Upgrade
Auro-3D
®
The Auro-3D
®
technology suite is a groundbreaking new audio technology that combines height-based listening formats with powerful creative tools to
deliver an unrivaled three-dimensional sound experience. Auro-3D
®
is the general format name for Sound in 3D and its related speaker lay-outs.
This unit is equipped with an Auro-3D decoder.
With Auro-3D, Front Height (FHL+FHR), Surround Height (SHL+SHR) and Top Surround (TS/optional) are added to a conventional 5.1-channel system to
achieve a natural and realistic sound field that is three-dimensional and fully immersive.
Auro-Matic
®
Auro-Matic
®
Up-mixing technology software is a unique creative tool that transforms legacy Mono, Stereo and Surround content into a natural 3D or 2D
listening experience.
To upgrade:
You can upgrade your Denon AV Receiver through our website:
http://upgrade.denon.com.
The upgrade costs $199.00 and it’s available for the Denon models: AVR-X4100W, AVR-X4200W, AVR-X5200W, AVR-X6200W, AVR-X7200W and AVR-
X7200WA. Once the AVR is registered and the payment is performed the AV Receiver is registered as the Auro version and ready to download the Auro
firmware version automatically, through the setup menu of the AV Receiver.
Once upgraded with the Auro®-Codec Decoder, the Denon AVR-X5200W, AVR-X6200W, AVR-X7200W and AVR-X7200WA are capable of decoding the
original Auro-3D® mix and playing back an Auro 10.1 channel configuration (including "Voice of God" channel). The AVR-X4100W and the AVR-X4200W can
process an Auro 9.1 channel configuration for full height layer capability.
Note: Auro-3D does not support a Dolby Atmos configuration using Top Front, Top Middle, Top Rear, Rear Height, or any Dolby Atmos Enabled speakers.
If you are using these speakers and want to take advantage of the Auro-3D Upgrade, you need to relocate them to Front Height and Surround Height
speaker locations as shown above.
It is possible to support both an Auro-3D and Dolby Atmos by adding Front Height speakers to a 5.1-channel configuration.
Upgrades/Updates (2 of 2)FAQ’s 2
18

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g