Denon AVR-X7200W Product Guide

Specifications - Video section, Tuner Section, Wireless LAN Section
HOME
Video section
Standard video connectors
Input/output level and impedance 1 Vp-p, 75 Ω/ohms
Frequency response 5 Hz -10MHz, 0, - 3dB
Color component video connector
Input/output level and impedance
Y signal 1 Vp-p, 75 Ω/ohms
PB/CB signal 0.7 Vp-p, 75 Ω/ohms
PR/CR signal 0.7 Vp-p, 75 Ω/ohms
Frequency response 5 Hz - 60MHz – 0, -3dB
Tuner section
FM AM
Note: µV at 75 Ω/ohms, 0 dBf = 1x10
-15
W
Reception frequency range 87.50 MHz - 107.90 MHz 530 KHz - 1710 KHz
Effective sensitivity 1.5 µV (14.8 dBf) 20µV
S/N ratio (IHF-A)
Mono 78 dB
85dBStereo 68 dB
HD 85 dB
Distortion (1 KHz)
Mono 0.1 %
0.02 %Stereo 0.2 %
HD 0.02 %
Wireless LAN section
Network type (wireless LAN standard) Conforming to Wi-fi
® *
1
Security
WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency 2.4 GHz
Number of channels 1 - 11ch
*1 The Wi-fi
®
CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
SPECIFICATIONS - VIDEO –
TUNER – WIRELESS LAN
SPECIFICATIONS -
AUDIO
SPECIFICATIONS -
DIMENSIONS - WEIGHT
SPECIFICATIONS
BLUETOOTH - GENERAL
21

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g