Rear Panel (1 of 2)
HOME
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for
Bluetooth/wireless connectivity when connecting to a network
via wireless LAN, or when connecting to a handheld device via
Bluetooth.
• Place the external antennas for Bluetooth/wireless
connectivity evenly over the screw terminal of rear.
• Turn clockwise until the antennas is fully connected.
• Rotate the antenna upwards for best reception.
Denon Link HD connector
Used to connect a Denon Link HD compatible Blu-ray Disc player.
SIGNAL GND terminal
Used to connect a ground wire for the turntable.
Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
7.1-channel input connectors (7.1CH IN)
Used to connect to a device that has multi-channel audio output connectors.
HDMI connectors
Used to connect devices equipped with HDMI connectors.
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN network.
USB port
This is used to connect USB storages (such as USB memory devices) and the
USB cable supplied with iPod.
AC inlet (AC IN)
Used to connect the power cord.
REAR PANEL 2DISPLAY
6
To Next Page
Loading...
