Denon AVR-X7200W Product Guide

Front Panel

Power operation button ( )
Used to turn the power of the MAIN ZONE
(room where this unit is located) on/off
(standby).

Power indicator
This is lit as follows according to the power status:
• White: Power on
• Off: Normal standby
• Red:
•
When “HDMI Pass Through” is set to “On”
•
When “HDMI Control” is set to “On”
•
When “IP Control” is set to “Always On”
 SOURCE SELECT knob
This selects the input source.
 Remote control sensor
This receives signals from the remote control unit.
 Display
This displays various pieces of information.
 MASTER VOLUME knob
This adjusts the volume level.
 Door
When you are using buttons and/or connectors behind the
door, press the bottom of the door to open it. Be careful not
to catch your fingers when closing the door.
1 2 3 4
5
6
7
HOME
Buttons and Connectors Behind the
Compartment Door (2 of 2)
Buttons and Connectors Behind the
Compartment Door (1 of 2)
2

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g