Why my Denon Blu-ray Player can't read a playable disc?
If your Denon Blu-ray Player cannot read a playable disc, the pickup lens may be dirty. Before requesting servicing, try cleaning the laser pickup with a commercially available lens cleaner.
How to enable multi-channel audio on Denon Blu-ray Player?
If multi-channel audio is not output on your Denon Blu-ray Player, press AUDIO on the remote control to switch from audio supported by a disc to multi-channel audio.
How to enable interactive audio on Denon Blu-ray Player?
To enable interactive audio on your Denon Blu-ray Player, set “BD Audio mode” to “Mix Audio Output” using the OPTION setting menu.
How to reset rating level password on Denon Blu-ray Player?
If you have forgotten the password for the rating level on your Denon Blu-ray Player, perform the “System” – “Reset” procedure on the SETUP menu.
Why is there no picture on my Denon Blu-ray Player?
If no picture appears on your Denon Blu-ray Player, try the following: * Ensure the TV's input setting is switched to the external input connected to the player. * Check if the Pure Direct function is set to “Pure Direct 1” or “Pure Direct 2” and set it to “Off”. * Verify that the resolution setting matches the connected device's resolution. * Make sure the HDMI cable is securely connected. * If the HDMI OUT connector is connected to a DVI IN connector, note that DVI connection does not support HDCP, which is necessary for correct HDMI output.
How to switch camera angle on Denon Blu-ray Player?
If the camera angle does not switch on your Denon Blu-ray Player, it is possible that multiple angles are not recorded in the BD-Video or DVD-Video. Also, multiple angles may only be recorded for specific scenes.
Why does my Denon Blu-ray Player not return to start-up screen?
If your Denon Blu-ray Player does not return to the start-up screen when a disc is removed, there may be an internal error. Try setting the power to standby, waiting a while, and then turning the power back on.
What to do if my Denon Blu-ray Player buttons do not work?
If the buttons do not work or the unit stops responding on your Denon Blu-ray Player: * Operations may not be permitted by the disc. * The safety protection device may be activated. Unplug the power cord once, wait for 5-10 seconds, and then plug it in again.
How to fix no sound or hard to hear sound on Denon Blu-ray Player?
If you experience no sound or the sound is hard to hear on your Denon Blu-ray Player, check these: * Verify the audio connections of connected devices and speakers. * Ensure the connected audio devices are powered on. * Confirm the input selection is set to the input to which the unit is connected. * Check that the audio output is properly selected.
How to get subtitles to show on Denon Blu-ray Player?
If subtitles are not displayed on your Denon Blu-ray Player: * Subtitles cannot be displayed for BD-Video, DVD-Video, or DivX® files that do not contain subtitles. * Check if the subtitle setting is “Off”. Use the disc menu or SUBTITLE button to set the subtitles to display.
General| 3D | Yes |
|---|---|
| Depth | 295 mm |
| Width | 434 mm |
| Height | 108 mm |
| Weight | 4900 g |
| Device type | Blu-Ray player |
| Product color | Black |
| Audio decoders | - |
| Cables included | AC |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Disc types supported | BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Dynamic range (1kHz) | 100 dB |
| Playback disc formats | Blu-Ray video, CD audio |
| Supported video modes | 1080p |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Digital audio optical out | 0 |
| Analog signal format system | NTSC, PAL |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 20 W |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Audio output channels | 2.0 channels |
| Total Harmonic Distortion (THD) | 0.0025 % |
To Next Page
