To Next Page
B
Brandon DiazAug 30, 2025
How to turn on HD audio output on Denon Blu-ray Player?
- JJennifer WilliamsAug 31, 2025
To enable HD audio output on your Denon Blu-ray Player, set “BD Audio Mode” to “HD Audio Output”.
How to turn on HD audio output on Denon Blu-ray Player?
To enable HD audio output on your Denon Blu-ray Player, set “BD Audio Mode” to “HD Audio Output”.
What to do if playback does not start on Denon Blu-ray Player?
If playback does not start, or starts and stops immediately on your Denon Blu-ray Player, consider the following: * If there is condensation inside the player or on the disc, let it sit for 1 to 2 hours with the power off. * If the disc is scratched or contaminated, clean it or replace it. * Ensure the disc is loaded correctly, with the side to be played face down. * Check if the loaded disc is playable. * Make sure a disc is inserted.
Why is the picture disrupted on my Denon Blu-ray Player?
If the picture is not displayed or is disrupted, or if a BD-Video or DVD-Video disc is in black and white on your Denon Blu-ray Player: * The picture may be slightly disturbed right after fast-forwarding or reversing. This is not a malfunction. * Check if the disc is compatible with the player or if it has the correct region code. This player supports region code “B” for BD-Video discs and “2” or “ALL” for DVD-Video discs.
What to do if my Denon Blu-ray Player freezes during playback?
If the picture on your Denon Blu-ray Player freezes momentarily during playback, it could be due to: * A scratched or contaminated disc. Clean the disc or replace it with a non-scratched disc. * A problem with the data recorded on the disc.
How to fix Denon Blu-ray Player when power does not turn on?
If the power does not turn on for your Denon Blu-ray Player, check these items: * Ensure the power cord is properly connected. * Plug the power supply cord into the household power outlet. * The safety protection device may be activated. Unplug the power cord once, wait for 5-10 seconds, and then plug it in again.
What to do if video and audio are not output via the HDMI connection on Denon Blu-ray Player?
If video and audio are not output via the HDMI connection on your Denon Blu-ray Player, consider the following: * Check the HDMI cable connection. * Ensure the “HDMI” indicator is lit on the unit's display. * Confirm that the connected display device supports HDCP. * Verify the HDMI video resolution setting supports the resolution of the connected device. * Try turning off the power to both the unit and the connected device, then turn them back on. * Unplug and then replug the HDMI cable. * If connected to an AV receiver, connect the unit directly to a television to check the video and audio output.
Why is there no sound from my Denon Blu-ray Player?
If you are experiencing no sound from your Denon Blu-ray Player, it could be due to several reasons: * If the unit is in reverse play, fast forward, fast reverse, slow forward, slow reverse, or pause mode, return to normal playback. * If the HDMI OUT connector is connected to a DVI IN connector of equipment, note that DVI connection does not support HDCP, which is necessary for correct audio output. * Check if the Pure Direct function is set to “Pure Direct 1” or “Pure direct 2” and set it to “Off”.
General| 3D | Yes |
|---|---|
| Depth | 295 mm |
| Width | 434 mm |
| Height | 108 mm |
| Weight | 4900 g |
| Device type | Blu-Ray player |
| Product color | Black |
| Audio decoders | - |
| Cables included | AC |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Disc types supported | BD, BD-R, BD-RE, CD, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Dynamic range (1kHz) | 100 dB |
| Playback disc formats | Blu-Ray video, CD audio |
| Supported video modes | 1080p |
| Card reader integrated | No |
| USB 2.0 ports quantity | 1 |
| Digital audio optical out | 0 |
| Analog signal format system | NTSC, PAL |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 20 W |
| Signal-to-Noise Ratio (SNR) | 115 dB |
| Audio output channels | 2.0 channels |
| Total Harmonic Distortion (THD) | 0.0025 % |
