Denon DCD-695 - Normal CD Playback; Advanced CD Playback

ENGLISH
NORMAL CD PLAYBACK
(1)
Starting
Playback
1
Press
the
stop
button
(
Mi
STOP).
e
When
all
tracks
have
been
played
on
a
disc,
playback
will
stop
by
itself.
Precautions:
e If no disc has been loaded or the disc has been placed upside
( >» PLAY ) down, all indicators will light.
e@ When the information on the disc cannot be read correctly, for
example due to dust or dirt on the disc, the indicators will read
as shown below. Nothing will be shown on the TRACK NO.
and TIME displays, and it may take quite a while to read the
disc.
1 Press the power switch (POWER) to turn on the power.
2 Load the disc you want to play.
e When the disc holder is closed, the disc is read and the
number of tracks and total playing time of the disc are
displayed.
3 Press the play button ( » PLAY).
ogee a eee te
(2) Stopping Playback
Normal
display
Improper
display
( Mi STOP )
ADVANCED CD PLAYBACK
Press the Automatic search reverse button ( I@q@ ) during play-
back.
e The pickup will return to the beginning of the current track and
playback will continue. Pressing the button several times will
return the pickup the corresponding number tracks.
© Playing Specific Tracks in a
Specific Order ...........:csscccsessssscesveseeeeees Programmed Play
e With this function, you can choose any of the tracks on the disc
and program them to play in any order.
e Programming is possible with the disc holder open.
e Up to 20 tracks can be programmed.
e The programmed tracks are shown on the calendar.
inti
= Heesecee
(
DPI)
(
Number
buttons
(
PROG/DIRECT
)
({ Number buttons )
e Use the number buttons and the +10 button to input the
number of the desired track.
For example, to play track number 4, press [4], and to play
track number 12, press [+10] and [2] . Playback will begin from
that track.
2]
Advancing
to
the
next
track
1):
Programming
during playback ...........recssssssesssneeersenes
Press the Automatic search forward button ( PPI) during play-
back.
e The pickup will advance to the beginning of the next track and
playback will continue. Pressing the button several times will
e Press the PROG/DIRECT button so that the indicator
lights, then use the number buttons and the +10 button to
program the tracks.
For example, to program tracks 3, 12, and 7, press
forward
the
pickup
the
corresponding
number
tracks.
PROG/DIRECT
.
[3],
270],
21,
and
fl.
3)
Returning
to
the
beginning
of
the
The
corresponding
track
number
lights
on
the
calendar
each
=
n
time
a
track
is
programmed,
the
track
number
is
displayed
on
foe
Surrent.
ger
airing
playback
[Automatic
Search
|
the
TRACK
NO.
display,
and
the
total
playing
time
of
the
programmed tracks is displayed on the TIME display. A few
seconds after the last track has been programmed, the total
number of tracks programmed is displayed on the TRACK NO.
dispiay and the total playing time of the programmed tracks is
displayed on the TIME display.