Denon DCD-810 - Page 5

e @
Aut Space Button (AUTO SPACE)
Pressing this button will cause the [A. SPACE | indicator to light
and a blank space of approximately 4 seconds is inserted
between tracks during CD playback. Pressing the button once
more, the indicator goes out and the Auto Space
feature is cancelled.
e When one of the track search buttons ( 1€q or PPE) is pressed,
the Auto Space function will not operate.
e The Auto Space function will work during normal playback as
well as programmed playback.
e Although 4-second blanks are inserted between tracks, this
additional time is not reflected by the indication on the time
remaining display or time display when the Auto Edit function is
engaged.
Repeat All Tracks Button (ALL)
Press this button to repeat playback of all tracks.
e When this button is pressed, [ALL] lights on the display and all
tracks on the disc or in a program will be repeatedly played
back. Press this button once more to disengage the Repeat All
function.
A-B Repeat Button (A — B)
e Press this button for repeat playback between a designated
starting point (A) and an ending point (B). (Refer to page 8 for
details.)
Random Play Button (RANDOM)
e Press this button to play the tracks on the disc in random order.
ane Mode Button (TIME)
This button is used to select the desired indication on the TIME
display. The indication on this display will change each time the
button is pressed.
Normally, the elapsed playback time of the current track is
displayed.
Pressing the button once, is displayed and the
remaining time of the current track is displayed.
Pressing once more, is displayed, and total playing
time of remaining tracks is displayed. However, when program-
med play is in progress, the total remaining time of the program
is displayed.
Press the button once again to return to the normal display of
the elapsed playback time of the current track.
Program/Direct Button (PROG/DIRECT)
e Press this button to switch between the program memory and
direct search functions. (Refer to Page 7)
Number Buttons (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10)
e Use these buttons for the direct search and program memory
functions.
For direct search, press for example button [3] if you want to
hear track number 3. For track number 12, press then [2].
To program tracks, press the PROG/DIRECT button to set to the
program mode.
+10 Button
e Press this button first when selecting track numbers over 10.
Use it together with the number buttons. For example, to select
track number 15, press then [5].
For track number 33, press three times, then press [3].
Play Button ( >» PLAY)
e Press this button to play the disc.
When pressed, the indicator lights and the number of
the track being played, the index number, and the elapsed time
for that track are displayed.
All tracks light on the calendar and turn off in order after each
track is played.
e After the last track is played, the [> PLAY] indicator turns off and
the unit is set to the stop mode.
e When a disc is set in the disc holder and the ( ® PLAY) button is
pressed, the disc holder closes and playback begins automati-
Cally.
=)
Pause Button { If PAUSE)
e Press this button to temporarily interrupt playback.
e When pressed during playback, playback stops, the [> PLAY]
indicator turns off, and the LILPAUSE | indicator lights.
e Tocancel the pause mode, either press the { » PLAY) button or
press the ( IEPAUSE) button again.
Automatic Search Reverse Button ( i€¢ )
e Press this button to return the pickup to the beginning of the
present track. Press again to return to other tracks.
e By pressing the button a number of times, the pickup will move
back the corresponding number of tracks.
Automatic Search Forward Button ( PPI)
e Press this button to move the pickup forward to the beginning of
the next track. Press again to move ahead to other tracks.
e By pressing the button a number of times, the pickup will
advance the corresponding number of tracks.
atop Button ( Mi STOP)
Press this button to stop playback.
The disc will stop rotating, and the number of tracks and total
playing time of the disc are displayed on the TRACK NO. and
TIME displays, respectively.
e In case programmed playback is engaged when this button is
pressed, the number of tracks and total playing time of the
program are displayed.
e Ifthis button is pressed in the stop mode, the program memory
is cleared.
Manual Search Reverse Button ( 44 )
e Press this button during playback for fast reverse search. As
long as the button is kept pressed, music signals are played back
faster than normal.
e Pressing this button when the pause mode is engaged, you can
quickly reverse the pickup to a desired position, three times
faster compared to manual reverse search during playback.
During this time, no sound is heard. :
Manual Search Forward Button ( PP )
e Press this button during playback for fast forward search. As
long as the button is kept pressed, music signals are played back
faster than normal.
e Pressing this button when the pause mode is engaged, you can
quickly forward the pickup to a desired position, three times
faster compared to manual forward search during playback.
During this time, no sound is heard.
Call Button (CALL)
e Press this button to check the tracks which have been prog-
rammed.
Headphones Jack (PHONES)
e For private listening, you can connect your headphones to this
jack. Do not raise the volume level too much when listening
through headphones. (Headphones are sold separately.)
Volume Control
e Use this control to adjust the volume of the headphones.
Output Terminal (FIX-VARIABLE)
e Connect these jacks to the input jacks on your amplifier. (Refer
to page 6 for details on the connections.)
Continuous Operation
Keeping one of the Automatic Search buttons ( 1¢€ or PPI pressed
will repeat the function of that button.