Denon DN-700C - Page 16

DN-700C/DN-501C
MIDI Command Guide
16
Command Category Code Command Example Example Command Code * Red points are variable Remark
[SET AB ] 5 33 Set AB loop
A point = 000:01;00
B point = 000:02;00
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x21,0x12,0x30,0x30,0x30,0x3A,0x30,0x31,
0x3B,0x30,0x30,0x30,0x30,0x30,0x3A,0x30,0x32,0x3B,0x30,0x30,0x44,0x37,0xF7
* 1
Set AB loop
A point = 000:01;00
B point = 000:05;00
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x21,0x12,0x30,0x30,0x30,0x3A,0x30,0x31,
0x3B,0x30,0x30,0x30,0x30,0x30,0x3A,0x30,0x35,0x3B,0x30,0x30,0x44,0x41,0xF7
[SET CUR MEDIA XXX]
5 34
USB
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x22,0x04,0x30,0x30,0x30,0x30,0x46,0x44,
0xF7
CD
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x22,0x04,0x30,0x30,0x30,0x31,0x46,0x45,
0xF7
iPad
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x22,0x04,0x30,0x30,0x30,0x32,0x46,0x46,
0xF7
Net
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x05,0x22,0x04,0x30,0x30,0x30,0x33,0x30,0x30,
0xF7
* 1 The parameter and checksum (written in red) are variable. The first 9 bytes are the A point time information in ASCII ( “000:00;00” to “999:59;74”). The B point time information follows it
with the same format.