Denon DN-700C

DN-700C/DN-501C
MIDI Command Guide
24
4-7. Device status
Command
Category
Code
Command Example Example Command Code * Red points are variable Remark
[GET POW STAT] 11 1 Power status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x01,0x00,0x31,0x45,0xF7
[GET WIN STAT] 11 2 Display window status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x02,0x00,0x31,0x46,0xF7
[GET DIM STAT] 11 3 dimmer status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x03,0x00,0x32,0x30,0xF7
[GET LOCK STAT] 11 4 Key lock status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x04,0x00,0x32,0x31,0xF7
[GET PITCH STAT] 11 5 Pitch status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x05,0x00,0x32,0x32,0xF7
[GET PITCH VAL] 11 6 Pitch value 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x06,0x00,0x32,0x33,0xF7
[GET KEY STAT] 11 7 Master key status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x07,0x00,0x32,0x34,0xF7
[GET PRS 5] 11 8 Preset setting value of #005 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x08,0x01,0x05,0x32,0x42,0xF7
[GET UBL VOL] 11 9 Volume 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x09,0x00,0x32,0x36,0xF7
[GET FW VER] 11 10 Firmware version 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x0A,0x00,0x32,0x37,0xF7
[GET DRV VER] 11 11 Drive firmware version 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x0B,0x00,0x32,0x38,0xF7
[GET DEV ID] 11 12 MAC address 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x0C,0x00,0x32,0x39,0xF7
[GET PPWD] 11 14 Password 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x0E,0x00,0x32,0x42,0xF7
[GET AVAILABLE
PSTAT]
11 15 Power status 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x0F,0x00,0x32,0x43,0xF7
[GET CUR MEDIA] 11 18 Current Media 0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x12,0x00,0x32,0x46,0xF7
[GET ALV 5] 11 19
System setting value of
#0005
0xF0,0x00,0x40,0x03,0x11,0x01,0x00,0x0B,0x13,0x04,0x30,0x30,0x30,0x35,0x46,
0x39,0xF7
* 1 The parameter and checksum (written in red) are variable. The first 4 bytes are the System setting index number (“0000” to “0008” in ASCII).