11
DN-S1200
(4) SENSORUNITのねじ1本をはずしてからSENSORUNIT
を取りはずす。
(5) SPACERGNDのねじ1本をはずしてからSPACERGND
を取りはずす。
(6) 後面側のねじ 2 本と FRONTSUBPANEL のねじ 2 本を
はずす。
(7) FRONTSUBPANEL を引き上げて取りはずす。
(4) Remove the screw on the SENSOR UNIT and then re-
move the SENSOR UNIT.
(5) Remove the screw on the SPACER GND and then re-
move the SPACER GND.
(6) Remove the 2 screws on the rear side and 2 screws
on the FRONT SUB PANEL.
(7) Pull up the FRONT SUB PANEL and remove the
FRONT SUB PANEL.
SCREWS
SCREWS
SCREW
SPACER GND
Rear Side
TOP CASE UNIT
FRONT SUB PANEL
SENSOR UNIT