Denon DN-S1200 - Power Pwb Unit

8
DN-S1200
4. POWERPWBUNIT
(1) 後面側のねじ 2 本と左側のねじをはずす。
(2) CORDBUSH を ACCORD と一緒に引き上げる
(3) AC INPUT PWB UNIT を矢印の方向に引き出し、AC
CORD と一緒にはずす。
4. POWER PWB UNIT
(1) Remove the 2 screws on the rear side and remove the
screw on the left side.
(2) Pull up the CORD BUSH with AC CORD.
(3) Pull the AC INPUT PWB Unit to the direction of arrow
and remove the AC INPUT PWB Unit and AC CORD.
AC INPUT UNIT
BOTTOM CHASSIS
SCREW
SCREW
CORD BUSH
Rear Side