Denon DNP-F109

11
Setting the general [General]
Language
Sets the language for display the menu.
•The factory language setting is “English”.
1
Press SETUP.
Turns on the Menu settings mode
and the Menu appears on the display
(vpage10 “Menu map”).
2
Use ui and ENTER to select
“General” – “Language”, then
press ENTER or p.
English
/
Deutsch
/
Français
/
Italiano
/
Nederlands
/
Español
/
Svenska
Auto-Standby
With the Auto-Standby ON, this unit will automatically enter the
standby mode after about 30 continuous minutes of stop mode with
no operation.
•The default setting is “On”.
1
Press SETUP.
Turns on the Menu settings mode
and the Menu appears on the display
(vpage10 “Menu map”).
2
Use ui and ENTER to select
“General” – “Auto-Standby”,
then press ENTER or p.
“Select Auto-Standby” menu appears.
3
Use ui to select “On”, then
press ENTER or p.
The setting is entered.
NOTE
In the following situations, the Auto-standby function does not operate.
•When the input source being played is “Internet Radio”, “iPod/
USB” (Remote mode) or “AirPlay”.
Setting the first setup
[Quick Setup]
•For details on “Quick Setup” operations, see the separate
“Getting Started”.
•If you cancelled “Quick Setup” menu or changed the network
environment, perform “Setup” – “Quick Setup”.
Preparations
Operations
Informations
Preparations