Denon DRA-397 - Before Operating; Operation; Playing the Input Source; Turning the Sound off Temporarily (MUTING)

11
ENGLISH
Operation
Playing the input source
Use FUNCTION to select the input source you want to
play.
Use VOLUME to adjust the volume.
• The volume level is displayed on the volume level display.
1
3
Start playback on the selected component.
For operating instructions, refer to the component’s manual.
2
About the button names in this explanation
<>
: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
VOLUME
[MUTING]
[MODE SELECTOR 2]
[POWER ON]
FUNCTION
[MODE SELECTOR 1]
STATUS
PURE DIRECT
[DIMMER]
[VIDEO SELECT]
<POWER>
FUNCTION STATUS<PRESET •>
<LOUDNESS>
<SELECT>
<SPEAKER> <TONE DEFEAT> VOLUME
<ON/STANDBY> <PHONES>
<CH VOL>
PURE DIRECT
<TONE CONTROL>
Before operating Turning the sound off temporarily (MUTING)
Press [MUTING].
• Canceling MUTING mode:
To cancel the muting mode, either press [MUTING] or adjust the
volume.
Connect the headphones to
<
PHONES
>
.
• No sound is produced from the speakers automatically.
NOTE:
•To prevent hearing loss, be careful not to raise the volume level
excessively when using headphones.
Listening over headphones
Switching the speakers
Press
<
SPEAKER
>
to turn the corresponding speaker pair
on.
Press
<
ON/STANDBY
>
or [POWER ON].
• The power indicator blinks green and the power turns on.
Press
<
POWER
>
.
£ OFF:
The power turns off and the indicator is off.
¢ ON:
The power indicator lights red.
1
4
Set [MODE SELECTOR 1] to “A”.
2
Set [MODE SELECTOR 2] to “CD/iPod”.
3
ENGLISH
FUNCTION