Denon DRA-397 - Specifications

24
ENGLISH
Specifications
¢ Audio section
• Power amplifier
Rated output: 80 W + 80 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
Output terminals: A or B 4 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
• Analog
(LINE input-PRE OUT)
Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
S/N: 98 dB (IHF-A weighted) (TONE DEFEAT ON)
Total harmonic distortion: 0.009 % (–3 dB at rated output, 8 Ω/ohms) (1 kHz)
Rated output: 1.2 V
¢ Video section
• Standard video terminals
Input / output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz — +1, –3 dB
¢ Tuner section [FM] [AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB (IHF-A weighted)
STEREO 72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz): MONO 0.15 % (1 kHz)
STEREO 0.3 % (1 kHz)
¢ General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.4 A
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-27/64”)
Mass: 9.4 kg (20 lbs 11.6 oz)
¢ Remote control unit (RC-1052)
Batteries: R6P/AA Type (Two batteries)
External dimensions: 52 (W) x 243 (H) x 21 (D) mm (2-3/64” x 9-9/16” x 53/64”)
Mass: 175 g (Approx. 6.2 oz) (included batteries)
¢ ZONE remote control unit (RC-1056)
Batteries: R03/AAA Type (Two batteries)
External dimensions: 54 (W) x 115 (H) x 23 (D) mm (2-1/8” x 4-17/32” x 29/32”)
Mass: 80 g (Approx. 2.8 oz) (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
ENGLISH