Denon DRA-685 - Technical Specifications Overview; Detailed Component Specifications

29
ENGLISH
• Audio section
(Power amplifier)
Rated output: 100 W + 100 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05 % T.H.D.)
Output terminals: A or B 14 to 16 Ω/ohms
A+B 18 to 16 Ω/ohms
(Analog)
LINE input — PRE OUT
Input sensitivity/input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 50 kHz: ±1.5 dB
S/N ratio: 100 dB (IHF-A weighted)
Total harmonic distortion: 0.009 % (-3 dB at rated output,8 Ω/ohms) (1 kHz)
Rated output: 1.2 V
PHONO input — REC OUT
Input sensitivity/input impedance: 3.0 mV/47 kΩ /kohms
RIAA deviation: ±0.5 dB (20 Hz ~ 20kHz)
S/N ratio: 74 dB (IHF-A weighted, with 5 mV input)
Total harmonic distortion: 0.03 % (1 kHz, 3V)
Rated output/Maximum output: 150 mV / 7 V
• Video section
(standard video jacks)
Input/output level and impedance: 1 V p-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz +1, -3 dB
• Tuner section
[FM] (note:
µ V at 75 Ω /ohms, 0 dBf = 1 x 10
-15
W) [AM]
Receiving range: 87.50 MHz ~ 107.90 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.4 µV (14.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 2.8
µ V (20.2 dBf)
STEREO 23
µ V (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15 % (1kHz)
STEREO 0.3 % (1kHz)
• General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.4 A
Maximum external dimensions: 434 (W) x 171 (H) x 416 (D) mm (17-1/16” x 6-23/32” x 16-3/8”)
Weight: 10.0 kg (22 lbs)
• Remote control unit RC-872, RC-873
RC-872
Batteries: R6P/AA Type (two batteries)
External dimensions: 54 (W) x 172 (H) x 27.2 (D) mm (2-1/8” x 6-3/4” x 1-1/16”)
Weight: 100 g (Approx. 6 oz) (including batteries)
RC-873
Batteries: R03/AAA Type (two batteries)
External dimensions: 47.5 (W) x 127 (H) x 18 (D) mm (1-27/32” x 5 x 11/16”)
Weight: 70 g (Approx. 2.4 oz)
* For purposes of improvement, specifications and design are subject to change without notice.
13
SPECIFICATIONS