To Next PageTo Next PageHow to troubleshoot SD Memory Card that cannot be read by Denon DVD-A1UDCI Media Player?
If your Denon Media Player cannot read the SD Memory Card, it may be due to the card's format being incompatible or the card itself not being supported. Ensure the playback media mode is set to “SD CARD MODE” by selecting “SD CARD MODE”.
What to do if angle does not switch on Denon Media Player?
If the angle does not switch on your Denon Media Player: * If a BD-Video or DVD-Video does not record multiple angles, the angle cannot be switched. * Multiple angles may only be recorded for specific scenes.
What to do if the playable disc is not read on Denon DVD-A1UDCI Media Player?
If your Denon Media Player isn't reading a playable disc, the pickup lens may be dirty. Before requesting servicing, try cleaning the laser pickup with a commercially available lens cleaner.
What to do if subtitles are not displayed on Denon DVD-A1UDCI?
If subtitles are not displaying on your Denon Media Player: * Subtitles cannot be displayed for BD-Video, DVD-Video or DivX® files that do not contain subtitles. * Check if the subtitle setting is “Off”. Use a disc menu or to set the displayed subtitle.
Why does my Denon Media Player get operated by remote control of other DENON products?
To prevent your Denon Media Player from being operated by other Denon product remotes, set “Other Setup” – “Remote Control Setting” – “Receive Legacy Remocon” to “Off” on the GUI menu.
What to do if Denon DVD-A1UDCI Media Player buttons do not work or the unit stops responding?
If the buttons on your Denon Media Player aren't working or the unit stops responding: * Operations may not be permitted by the disc. * The safety protection device may be activated. Unplug the power cord, wait 5-10 seconds, and then plug it back in. * Refer to the instructions of the disc.
How to output HD audio on Denon DVD-A1UDCI?
To output HD audio on your Denon Media Player, set “BD Audio Mode” to “HD Audio Output”.
What to do if the picture is not displayed correctly on Denon DVD-A1UDCI Media Player?
If the picture on your Denon Media Player is not displayed correctly: * A slight disturbance may occur directly after fast-forwarding or reversing, which is normal. * Connect the DVD-A1UDCI’s video/S-Video/component video output either directly to the TV or to the TV via the AV Amp. * Check if the loaded disc is compatible with the player and has the correct region number.
Why is there no sound or the sound is hard to hear on Denon DVD-A1UDCI Media Player?
If you're experiencing no sound or the sound is hard to hear on your Denon Media Player: * Check the devices whose audio is connected and the speaker connections. * Verify that the power of the connected devices is on and that the input selection is set to the input to which the DVD-A1UDCI is connected. * Ensure the audio output is properly selected.
How to fix Denon DVD-A1UDCI remote control when it does not work?
If the remote control is not operating your Denon unit: * Aim the remote control directly at the infrared sensor window on the front of the unit. * Ensure you are within 7 meters of the remote control sensor. * Remove any obstacles between the remote and the unit. * Replace the batteries with new ones, inserting them in the correct direction, checking the q and w marks. * Make sure the signal code of the remote control matches the signal code of the unit.
General| Brand | Denon |
|---|---|
| Model | DVD-A1UDCI |
| Category | Media Player |
| Language | English |
