37
ENGLISH
USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS
15
Switching the Audio Language (Multiple Audio Function)
2 With DVDs containing multiple audio language signals, the audio language can be switched during playback.
1
2
During playback, press the AUDIO button.
• The current audio language number is displayed.
• If no sound is recorded on the disc, “– –” is displayed.
Use the
• and ª cursor buttons to select the desired language.
• The display turns off when the AUDIO or SELECT button is pressed.
Remote control unit
Remote control unit
NOTES:
• If the desired language is not set after pressing the • and ª cursor buttons several times, the disc does not include that language.
• The audio language set with the default settings (see page 45) is set when the power is turned on and when the disc is replaced. If that
language is not included on the disc, the disc’s default language is set.
FRA
Bonjour
3
To Next Page
Loading...
