Denon HEOS Amp HS2 - Disassembly Steps

DISASSEMBLY
• Removeeachpartfollowingtheowbelow.
• Reassembletheremovedpartsinthereverseorder.
• Read"SAFETY PRECAUTIONS"beforereassemblingtheremovedparts.
• Ifwirebundlesareremovedormovedduringadjustmentorpartreplacement,reshapethewiresaftercompleting
thework.Failuretoshapethewirescorrectlymaycauseproblemssuchasnoise.
SIDE COVER
See "DISASSEMBLY
1. SIDE COVER"
and"EXPLODED VIEW"
ORNAMENT,SIDELASS'Y
(Ref.No.ofEXPLODEDVIEW:P4)
ORNAMENT,SIDERASS'Y
(Ref.No.ofEXPLODEDVIEW:P5)
SIDEKEYPCB
(Ref.No.ofEXPLODEDVIEW:C4)
TOP COVER
See "DISASSEMBLY
2. TOP COVER"
and"EXPLODED VIEW"
TOPCOVERASSY
(Ref.No.ofEXPLODEDVIEW:P3)
BOTTOM COVER
See "DISASSEMBLY
3. BOTTOM COVER"
and"EXPLODED VIEW"
COVER,BOTTOMASS'Y
(Ref.No.ofEXPLODEDVIEW:P2)
FRONT COVER
See "DISASSEMBLY
4. FRONT COVER"
and"EXPLODED VIEW"
FRONTPANELHEOSAMP
(Ref.No.ofEXPLODEDVIEW:P1)
FRONTLEDPCB
(Ref.No.ofEXPLODEDVIEW:C6)
DIGITAL ASSY
See "DISASSEMBLY
5. DIGITAL ASSY"
and"EXPLODED VIEW"
CONNECTPCB
(Ref.No.ofEXPLODEDVIEW:C3)
DIGITALPCB
(Ref.No.ofEXPLODEDVIEW:C7)
MODULE,AIOS4000LEGOMODULE
(Ref.No.ofEXPLODEDVIEW:C8)
MAIN ASSY
See "DISASSEMBLY
6. MAIN ASSY"
and"EXPLODED VIEW"
MAINPCB
(Ref.No.ofEXPLODEDVIEW:C1)
SMPSPCB
(Ref.No.ofEXPLODEDVIEW:C2)
DCINPCB
(Ref.No.ofEXPLODEDVIEW:C10)
REARLEDPCB
(Ref.No.ofEXPLODEDVIEW:C5)
10