Denon HEOS Amp - Connecting Devices to HEOS Amp

(4) Disconnect the connector wire. Remove the SIDE KEY PCB.
2. TOP COVER / BOTTOM COVER
Proceeding : SIDE COVER
→
TOP COVER / BOTTOM COVER
(1) Remove the screws.
(2) Remove the screws and remove the top cover.
Note: When assembling, be careful to pinch the antenna cable.
(3) Remove the screws and remove the bottom cover.
(4) Remove the screw.
.
Antenna cable
Shooting direction: E
(Right side)
Shooting direction: F
(Left side)
13