Denon HEOS Amp - Digital Pcb

4. DIGITAL PCB
Proceeding : SIDE COVER
→
TOP COVER
→
MODULE PCB
→
DIGITAL PCB
(1) Remove the screws.
(2)Remove the screws and remove the side connector PCB.
(3) Remove the screws, the connector wire and FFC. Loosen the style pin.
Then remove the PCB from the support.
Shooting direction: B
(Rear side)
FFC
CN13
SUPPORT
STYLE PIN
CN43
Shooting direction: D
(Top side)
Shooting direction: F
(Left side)
15