5. Firmware burning procedure after Core Module replacement ow
Checking
- Player serial number.
Old Core Module's
- WiFi MAC address
.
New Core Module's
- WiFi MAC address.
Core Module replacement.
Power On
Network cable is unplugged.
Check the Front
LED Color
Writing the latest rmware.
Insert USB memory.
Writing
See "2.Updationg by USB".
Remove the USB memory.
Automatically restart the
system.
Change Region Setting.
Insert USB memory.
Writing
See "3.Service region
settings update procedures".
Remove the USB memory.
Power cycle.
Change Release Type.
Insert USB memory.
Writing
See "4. Release Type
settings update procedures".
Remove the USB memory.
Power cycle.
Connect to the Network.
Launch HEOS Application.
Check Firmware Version,
Region, and Release Type.
Finish
Solid Purple
Blue blink
Blue blink
The body of the illustrations is HEOS5 model. LED color is common.
23
To Next Page
Loading...
