Denon HEOS Amp - Setting Up Your First HEOS Amp

6. MAIN (VOLUME-SMPS) PCB
Proceeding : SIDE COVER
→
TOP COVER
→
CORE MODULE PCB ASSY
→
DIGITAL PCB
→
SUB SMPS PCB
→
MAIN PCB / REAR LED PCB / AC CONNECTOR PCB
(1) Remove the screws.
(2) Remove the connector wire and FFC.
7. FRONT PANEL ASSY
Proceeding : SIDE COVER
→
TOP COVER
→
BOTTOM COVER
→
FRONT PANEL ASSY
(1) Remove the screw.
Shooting direction: B
(Rear side)
REAR LED PCB
AC CONECTOR PCB
Shooting direction: D
(Top side)
CN43
Shooting direction: D
(Top side)
17